Uploaded November 2025 | Updated November 2026, 16 hours ago
UPDATE: HyperX now mentions how to recalibrate the controllers officially on their website; supportcenter.hyperx.com/articles/clutch-gladiate-controller/hyperx-clutch-gladiate-calibration-mode/68d6fcc11498c079f6bbb64a
Wanted to document this on video as this feature was NOT documented by HyperX (at the time of this video being made) and info on this was extremely scarce online. This is rather useful for these controllers as trigger sensitivity is often far too sensitive from the factory (registers a full press even when the trigger stops are being used) and needs recalibration to work properly.
Text guide;
1) Disconnect the controller.
2) Hold down the Xbox, Menu, and View buttons.
3) Reconnect the cable whilst keeping those three buttons held down.
4) When connected, the connector light should be flashing rapidly.
5) Rotate the thumbsticks three times to the outer edge, and press down the triggers as far as possible three times.
6) Press Down + Y to exit the calibration. The controller should automatically re-connect.
7) Enjoy your newly calibrated Gladiate!
▼ MORE INFO DOWN BELOW ▼
► Follow on Twitch!: twitch.tv/ThunderTHR
► IMPACT REPLAY CLIP SUBMISSIONS - docs.google.com/forms/d/e/1FAIpQLSdtLgL9eBWRIprt-9W3QgMWvE4UssqJzNFkrPpT-r32rGJkgA/viewform
► Bluesky - https://bsky.app/profile/thunderthr.bsky.social
► Discord - discord.gg/9aFEbbQvbT
► Racing Game Catalogue - docs.google.com/spreadsheets/d/1oK3FpYTup9KB46EK7UhKJhMYq_wsjh3rMsu45WlENJs/edit?usp=sharing
► Become a YouTube Member? - youtube.com/channel/UCi1SYbmF6avHDpXs-1PPy6g/join
---------------------------------------------------------------------------------------------------------
► Thank you to the following YouTube Members;
- Meister
UPDATE: HyperX now mentions how to recalibrate the controllers officially on their website; supportcenter.hyperx.com/articles/clutch-gladiate-controller/hyperx-clutch-gladiate-calibration-mode/68d6fcc11498c079f6bbb64a
Wanted to document this on video as this feature was NOT documented by HyperX (at the time of this video being made) and info on this was extremely scarce online. This is rather useful for these controllers as trigger sensitivity is often far too sensitive from the factory (registers a full press even when the trigger stops are being used) and needs recalibration to work properly.
Text guide;
1) Disconnect the controller.
2) Hold down the Xbox, Menu, and View buttons.
3) Reconnect the cable whilst keeping those three buttons held down.
4) When connected, the connector light should be flashing rapidly.
5) Rotate the thumbsticks three times to the outer edge, and press down the triggers as far as possible three times.
6) Press Down + Y to exit the calibration. The controller should automatically re-connect.
7) Enjoy your newly calibrated Gladiate!
▼ MORE INFO DOWN BELOW ▼
► Follow on Twitch!: twitch.tv/ThunderTHR
► IMPACT REPLAY CLIP SUBMISSIONS - docs.google.com/forms/d/e/1FAIpQLSdtLgL9eBWRIprt-9W3QgMWvE4UssqJzNFkrPpT-r32rGJkgA/viewform
► Bluesky - https://bsky.app/profile/thunderthr.bsky.social
► Discord - discord.gg/9aFEbbQvbT
► Racing Game Catalogue - docs.google.com/spreadsheets/d/1oK3FpYTup9KB46EK7UhKJhMYq_wsjh3rMsu45WlENJs/edit?usp=sharing
► Become a YouTube Member? - youtube.com/channel/UCi1SYbmF6avHDpXs-1PPy6g/join
---------------------------------------------------------------------------------------------------------
► Thank you to the following YouTube Members;
- Meister










