How to Ream a Bicycle Head Tube and Seat Tube @cobraframebuilding
How to Ream a Bicycle Head Tube and Seat Tube  @cobraframebuilding
Uploaded August 2019 | Updated November 2026, 3 days ago
It's time to do some reaming, facing, and slotting on my mountain bike frame! First, you'll see me ream and face the head tube, then I ream the seat tube, and then I slot the seat tube.

Here's the podcast episode I mentioned with Drew Guldalian of Engin Cycles in the video: cobraframebuilding.com/podcast/ep-11-drew-guldalian-of-engin-cycles

So, for the head tube reaming and facing, I'm using a Park Tool head tube reamer/facer. In case you're not familiar with it, I give some background on the Park Tool reamer/facer, then I show the process for how to get a nice full clean up and make sure the headset will fit snug inside.

For the seat tube reaming, I used an adjustable reamer with straight blades that I'm actually not a huge fan of—but it was affordable. I also talk in the video about why helical reamers are better for seat tube reaming if you can afford one.

For the seat tube slotting operation, I use a homemade seat tube slotting tool that I made based on one I saw Drew Guldalian from Engin Cycles using.

Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE

SUBSCRIBE for more videos on bicycle framebuilding: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1

SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.

FOLLOW my shop updates on Instagram (@cobraframebuilding): instagram.com/cobraframebuilding.
How to Ream a Bicycle Head Tube and Seat TubeBrazing vs TIG Welding for Bicycle FramesDropper Seatpost Internal Cable Routing | MTB Frame BuildMy MTB Frame Needs a Disc Brake Tab and a Seat Stay Bridge!First Impressions Welding Titanium Tubing - Can We Just Figure It Out!?Simple Fork Welding Fixture Overview | Bicycle FramebuildingPros and Cons of the Unicrown Fork | Bicycle Framebuilding5 Things I Hate About My Everlast Welder | TIG TuesdaysBending a Titanium Tube for a Bike Frame | Tube Bender DemonstrationMTB Frame Comin Along Real Nice! | TIG Welding Seat StaysMaking a Seat Tube for a Hardtail MTB | Machining, Welding, BendingHow to Prep a Bicycle Frame for Painting
Cobra Framebuilding |

How to Ream a Bicycle Head Tube and Seat Tube

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER