Uploaded May 2017 | Updated November 2026, 5 hours ago
toolboom.com/en/digital-oscilloscope-siglent-sds1072cmlplus
In today's video, we'll talk about the ways to check an oscilloscope quickly and effectively after purchase, I mean check for any malfunctions.
What needs to be done first and foremost is, of course, to make inspection for visual evidence. It means checking the oscilloscope for completeness (let’s assume we’ve done it and have the complete set) and also making inspection for visual evidence per se. This is checking for any damage, for scratches, for example, or for evidence that the oscilloscope has been tampered with. It is also checking whether warranty stickers are there; in our case there are two stickers - the manufacturer sticker and the sticker from the store. You can see that our oscilloscope is new and not damaged at-a-glance.
Now let’s go on to checking the device technical condition. We need to switch it on first... PAUSE
Here it is; the device is turned on. The first thing to do is to test how all input channels work. So we use a probe from the package. In fact, each oscilloscope has an output for a calibration meander (square wave), and we will use it.
We can press the Auto button right away. So Channel 1 works OK with us, everything is being aligned, all is well. Let's check Channel 2.
Again, you can click the Auto channel not to turn the knobs manually. Well, in fact, everything is fine, all is well. Well, now we need to check how all buttons work, that is, check the display.
You can do this manually, meaning – you can click on everything .... But it takes a lot of time, it is annoying and dreary, and it is easy to make a mistake. In fact, all modern oscilloscopes have a special function - self-testing. Let's use it! As a rule, you can find it in the Utility section. Here it is. Self test - that is self-testing.
So - the first thing we check is the display. Let's check the display. With this check we can see whether there are any broken pixels. Now here is the red color. Absolutely everything is clear. I do not see any problems, artifacts or the like. Then there is the green color. No broken pixels here either. All is well. As you can see, everything is fine here.
The display is OK. Next, let’s test the keyboard.
Yeah, we turn all buttons one by one, and here we have segments lighting up.
Here's our dual encoder. There is a right arrow … and a left arrow ... If I press it, we will have this section illuminated. In this way, we can check virtually all buttons, not being afraid to skip any of them. It is in fact very convenient. So, we push right and left. Well, as we can see, everything is fine, absolutely all the buttons work OK, encoders operate fine, so all is well. And then you press three times this to exit
As we can see, the test takes just a few minutes, but after it we can be confident that the oscilloscope we have works perfectly.
Find us on social networks for more updates and useful tips:
👍 facebook.com/toolboom
👍 instagram.com/toolboom_com
#toolboom #siglent #oscilloscope
toolboom.com/en/digital-oscilloscope-siglent-sds1072cmlplus
In today's video, we'll talk about the ways to check an oscilloscope quickly and effectively after purchase, I mean check for any malfunctions.
What needs to be done first and foremost is, of course, to make inspection for visual evidence. It means checking the oscilloscope for completeness (let’s assume we’ve done it and have the complete set) and also making inspection for visual evidence per se. This is checking for any damage, for scratches, for example, or for evidence that the oscilloscope has been tampered with. It is also checking whether warranty stickers are there; in our case there are two stickers - the manufacturer sticker and the sticker from the store. You can see that our oscilloscope is new and not damaged at-a-glance.
Now let’s go on to checking the device technical condition. We need to switch it on first... PAUSE
Here it is; the device is turned on. The first thing to do is to test how all input channels work. So we use a probe from the package. In fact, each oscilloscope has an output for a calibration meander (square wave), and we will use it.
We can press the Auto button right away. So Channel 1 works OK with us, everything is being aligned, all is well. Let's check Channel 2.
Again, you can click the Auto channel not to turn the knobs manually. Well, in fact, everything is fine, all is well. Well, now we need to check how all buttons work, that is, check the display.
You can do this manually, meaning – you can click on everything .... But it takes a lot of time, it is annoying and dreary, and it is easy to make a mistake. In fact, all modern oscilloscopes have a special function - self-testing. Let's use it! As a rule, you can find it in the Utility section. Here it is. Self test - that is self-testing.
So - the first thing we check is the display. Let's check the display. With this check we can see whether there are any broken pixels. Now here is the red color. Absolutely everything is clear. I do not see any problems, artifacts or the like. Then there is the green color. No broken pixels here either. All is well. As you can see, everything is fine here.
The display is OK. Next, let’s test the keyboard.
Yeah, we turn all buttons one by one, and here we have segments lighting up.
Here's our dual encoder. There is a right arrow … and a left arrow ... If I press it, we will have this section illuminated. In this way, we can check virtually all buttons, not being afraid to skip any of them. It is in fact very convenient. So, we push right and left. Well, as we can see, everything is fine, absolutely all the buttons work OK, encoders operate fine, so all is well. And then you press three times this to exit
As we can see, the test takes just a few minutes, but after it we can be confident that the oscilloscope we have works perfectly.
Find us on social networks for more updates and useful tips:
👍 facebook.com/toolboom
👍 instagram.com/toolboom_com
#toolboom #siglent #oscilloscope










