Chris Powell | How To Program This Wood USMC American Flag - Carbide Create Tutorial @ChrisPowellFSD | Uploaded June 2019 | Updated October 2024, 6 hours ago.
In this tutorial I show how I use FREE images found online to design this wooden flag using Carbide Create.
If you’re interested in checking out a Shapeoko or other cnc machines or 3d printers, check out this affiliate link from Matterhackers. I get a small kick back from every sale made when you click it, and it really helps the channel out. http://www.matterhackers.com?aff=7550
The EGA can be found here: commons.wikimedia.org/wiki/File:Globeanchor.svg
The flag can be found here: fullsteamdesigns.com/maker-resources
There is a small glitch in the video that skips the part where I import the EGA into Carbide Create. I do it the same way that I do the flag file shown in the video. Just click Import External File, and select the EGA svg. Click open. I increase the size of this image to 10.5 inches for this demo.
I’ve made some adjustments to my feed rates to speed things up a little. Try adjusting yours if you feel comfortable. I run my 1/8” endmil at 100ipm feed, 80 plunge, .056 step over, .05 doc, .080 total depth. I usually turn it up to 200% while it’s running. I run my 60 degree v bit at about the same, with a .156 doc.
With all of the changes Carbide Create has been going through lately, I decided it was a good time to do a new flag design video. You can check that out here: youtu.be/AVyPPTqjZMU
Please leave a comment with any questions and I'll respond as soon as I can!
Did you make one of these after watching this tutorial? If so, I'd love to see it! Please tag me on Instagram @full_steam_designs and Facebook @Full Steam Designs
facebook.com/FullSteamDesigns
instagram.com/full_steam_designs
fullsteamdesigns.com
If you enjoy my content and would like to show your support on a more personal level, please consider checking me out on Patreon. Thank you!
patreon.com/fullsteamdesigns
In this tutorial I show how I use FREE images found online to design this wooden flag using Carbide Create.
If you’re interested in checking out a Shapeoko or other cnc machines or 3d printers, check out this affiliate link from Matterhackers. I get a small kick back from every sale made when you click it, and it really helps the channel out. http://www.matterhackers.com?aff=7550
The EGA can be found here: commons.wikimedia.org/wiki/File:Globeanchor.svg
The flag can be found here: fullsteamdesigns.com/maker-resources
There is a small glitch in the video that skips the part where I import the EGA into Carbide Create. I do it the same way that I do the flag file shown in the video. Just click Import External File, and select the EGA svg. Click open. I increase the size of this image to 10.5 inches for this demo.
I’ve made some adjustments to my feed rates to speed things up a little. Try adjusting yours if you feel comfortable. I run my 1/8” endmil at 100ipm feed, 80 plunge, .056 step over, .05 doc, .080 total depth. I usually turn it up to 200% while it’s running. I run my 60 degree v bit at about the same, with a .156 doc.
With all of the changes Carbide Create has been going through lately, I decided it was a good time to do a new flag design video. You can check that out here: youtu.be/AVyPPTqjZMU
Please leave a comment with any questions and I'll respond as soon as I can!
Did you make one of these after watching this tutorial? If so, I'd love to see it! Please tag me on Instagram @full_steam_designs and Facebook @Full Steam Designs
facebook.com/FullSteamDesigns
instagram.com/full_steam_designs
fullsteamdesigns.com
If you enjoy my content and would like to show your support on a more personal level, please consider checking me out on Patreon. Thank you!
patreon.com/fullsteamdesigns