UHS Hardware | How To Program BMW CAS3 0L01Y Semi-Smart Key using Autel IM608 II + GODIAG @UHSHardware | Uploaded March 2024 | Updated October 2024, 1 hour ago.
GODIAG - uhs-hardware.com/pages/search-results-page?q=cgdi%20cas&page=1
uhslink.com/3V2aJxb - Autel IM608 II is the most advanced key programming tool that combines the powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one tablet. It can read the immobilizer pins and password directly from the vehicle and store this information to use later when learning the newly programmed keys to the vehicle.
Highlights:
IM608 II = IM608 PRO II
One Year of Updates
Upgraded Version of Autel IM608 and IM608 PRO with the latest powerful hardware configuration
Support Multi-Language: Both Diagnostic Software and IMMO Software Support Multi-Language. (Default Language is English, but can be changed to German, Swedish, Italian, Portuguese, French, etc.)
Works for 85% Cars Wordwide: Including BMW, Mercedes Benz, VW, Audi etc. make your work simple and easier, Best Choice for Locksmith and Workshop.
Powerful Hardware: 10.1’’ Touchscreen • Android Operating System • XP400Pro Key And Chip Programmer Included • JVCI Wireless J2534 Pass Thru Programming Device Included
IMMO & KEY PROGRAMMING
Smart Mode For Guided And Automated Key Learning
Read PIN/CS (All Keys Lost), Key Generation, Key Learning, Remote Learning
IMMO ECU Reset/Adaptation, Refresh/Coding
Transponder Read/Write, EEPROM/MCU Read/Write
Expert Mode For Advanced Key Learning
DIAGNOSTICS & SERVICE
Powerful Combination Of Key Programming, All System Diagnostics and Advanced Maintenance Services
Powerful OE-Level Diagnostics for US, Asian and European Makes and Models
Advanced Maintenance Services: EPB, DPF, SAS, Oil Reset, BMS
Autel G-BOX3 - Mercedes Benz & BMW Adapter For Autel Key Programmer IM508 / IM608PRO / IM508S / IM608PROII
The Autel G-BOX3 is an adapter compatible with Autel’s MaxiIM IM608 and MaxiIM IM508 tablets (with the purchase of XP400Pro programmer) that aids in the programming of keys to Mercedes DAS3 CAN EIS/EXS vehicles in an ALL Keys Lost situation. The G-Box3 also supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles. Bench Method is also supported. All Keys Lost password calculations are approximately 4x to 8x faster.
Autel APB112 Smart Key Simulator for Autel Key Programmer
The APB112 smart key simulator is used to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip. It can also simulate the vehicle key chip. Currently, it supports to simulate the 4D type chip. More key chip types will be supported with future upgrades.
Autel - MaxiIM IMKPA - Expanded Key Programming Accesses for Renew / Unlock & More!
Supports over 10 key unlock types
BMW EWS3 key learning
Benz NEC key learning
Benz ESL_W209 read/write/erase
Compatible with IM508 and IM608 Autel key programmers
(XP400Pro required)
Includes 1-Year Warranty
Autel - CAN FD Adapter for 2018-201 Ford / GM Vehicles
Enables diagnostics of vehicles using the CAN FD (CAN Flexible Data-Rate) protocol used on newer GM and Ford vehicles.
Compatible with VCI or VCI/J2534 device included with Gen 1 Autel MaxiSys units: MX808, MS905, MS906, MS906BT, MS906TS, MS908, MS908P, MSELITE
Compatible with VCI/J2534 device included with the Gen 2 Autel MaxiSys units: MaxiADAS, MS908S, MS908SP, IM508, IM608
One-year limited warranty
Autel Chrysler 12+8 OBDII Security Gateway Bypass Cable
Autel's bypass for Chrysler's Security Gateway Module (SGM) which limits aftermarket scan tools to only reading DTCs and viewing data.
Most 2018 and newer FCA vehicles include a Security Gateway Module.
Connects to the Autel MaxiSys VCI.
_
Video Content originally created and posted by @AutelOfficialTechSupport
GODIAG - uhs-hardware.com/pages/search-results-page?q=cgdi%20cas&page=1
uhslink.com/3V2aJxb - Autel IM608 II is the most advanced key programming tool that combines the powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one tablet. It can read the immobilizer pins and password directly from the vehicle and store this information to use later when learning the newly programmed keys to the vehicle.
Highlights:
IM608 II = IM608 PRO II
One Year of Updates
Upgraded Version of Autel IM608 and IM608 PRO with the latest powerful hardware configuration
Support Multi-Language: Both Diagnostic Software and IMMO Software Support Multi-Language. (Default Language is English, but can be changed to German, Swedish, Italian, Portuguese, French, etc.)
Works for 85% Cars Wordwide: Including BMW, Mercedes Benz, VW, Audi etc. make your work simple and easier, Best Choice for Locksmith and Workshop.
Powerful Hardware: 10.1’’ Touchscreen • Android Operating System • XP400Pro Key And Chip Programmer Included • JVCI Wireless J2534 Pass Thru Programming Device Included
IMMO & KEY PROGRAMMING
Smart Mode For Guided And Automated Key Learning
Read PIN/CS (All Keys Lost), Key Generation, Key Learning, Remote Learning
IMMO ECU Reset/Adaptation, Refresh/Coding
Transponder Read/Write, EEPROM/MCU Read/Write
Expert Mode For Advanced Key Learning
DIAGNOSTICS & SERVICE
Powerful Combination Of Key Programming, All System Diagnostics and Advanced Maintenance Services
Powerful OE-Level Diagnostics for US, Asian and European Makes and Models
Advanced Maintenance Services: EPB, DPF, SAS, Oil Reset, BMS
Autel G-BOX3 - Mercedes Benz & BMW Adapter For Autel Key Programmer IM508 / IM608PRO / IM508S / IM608PROII
The Autel G-BOX3 is an adapter compatible with Autel’s MaxiIM IM608 and MaxiIM IM508 tablets (with the purchase of XP400Pro programmer) that aids in the programming of keys to Mercedes DAS3 CAN EIS/EXS vehicles in an ALL Keys Lost situation. The G-Box3 also supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles. Bench Method is also supported. All Keys Lost password calculations are approximately 4x to 8x faster.
Autel APB112 Smart Key Simulator for Autel Key Programmer
The APB112 smart key simulator is used to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip. It can also simulate the vehicle key chip. Currently, it supports to simulate the 4D type chip. More key chip types will be supported with future upgrades.
Autel - MaxiIM IMKPA - Expanded Key Programming Accesses for Renew / Unlock & More!
Supports over 10 key unlock types
BMW EWS3 key learning
Benz NEC key learning
Benz ESL_W209 read/write/erase
Compatible with IM508 and IM608 Autel key programmers
(XP400Pro required)
Includes 1-Year Warranty
Autel - CAN FD Adapter for 2018-201 Ford / GM Vehicles
Enables diagnostics of vehicles using the CAN FD (CAN Flexible Data-Rate) protocol used on newer GM and Ford vehicles.
Compatible with VCI or VCI/J2534 device included with Gen 1 Autel MaxiSys units: MX808, MS905, MS906, MS906BT, MS906TS, MS908, MS908P, MSELITE
Compatible with VCI/J2534 device included with the Gen 2 Autel MaxiSys units: MaxiADAS, MS908S, MS908SP, IM508, IM608
One-year limited warranty
Autel Chrysler 12+8 OBDII Security Gateway Bypass Cable
Autel's bypass for Chrysler's Security Gateway Module (SGM) which limits aftermarket scan tools to only reading DTCs and viewing data.
Most 2018 and newer FCA vehicles include a Security Gateway Module.
Connects to the Autel MaxiSys VCI.
_
Video Content originally created and posted by @AutelOfficialTechSupport
