Uploaded July 2019 | Updated November 2026, 3 hours ago
Rosin is now at a stage that it can be scaled to virtually any level of production. Once dialed in, 150g could be prepped, pressed, and collected by 1 person every -10 minutes. These systems can also be setup to operate up to 5 presses on 1 pump operated by a single person (that's pressing over 30lbs of bubble in an 8hr shift).
A few extra tips:
-This could be done with less bags. You could pre press a 75g puck inside two 37u bags. Do this twice, and wrap them with a 220u bag for a total of 150g.
-The combination of pre pressing, slow monitored pressure application, and use of 220u bags for structural support should be your biggest takeaways from this video.
- We utilized about 900 platen psi on this press (optimal force for bubble tends to be between 800-2,000 platen psi)
- Platen PSI is calculated by taking your total force (in this case, 8 tons or 16,000lbs of force) divided by the surface area of your bag (in this case 3"x6"= 18sqin) 16,000lbs/18sqin= 888 Platen PSI!
Lowtemp Industries is here to help you go solventless! Reach out with any questions you may have.
----------------------------------------------
Get the Rosin Press From this Video:
lowtemp-plates.com/collections/all-in-one/products/4x7-all-in-one-lowtemp-press?variant=7970085732396
----------------------------------------------
Daily Rosin Profit Calculator:
lowtemp-plates.com/pages/lowtemp-rosin-profit-calculator
----------------------------------------------
Contact Us:
lowtemp-plates.com/pages/contact-us
----------------------------------------------
Stay Connected:
Website: lowtemp-plates.com
Instagram: instagram.com/lowtemp.industries
Facebook: facebook.com/Lowtemp.Plates
TikTok: tiktok.com/@lowtemp.industries.co
X: twitter.com/Lowtemp_Indus
Rosin is now at a stage that it can be scaled to virtually any level of production. Once dialed in, 150g could be prepped, pressed, and collected by 1 person every -10 minutes. These systems can also be setup to operate up to 5 presses on 1 pump operated by a single person (that's pressing over 30lbs of bubble in an 8hr shift).
A few extra tips:
-This could be done with less bags. You could pre press a 75g puck inside two 37u bags. Do this twice, and wrap them with a 220u bag for a total of 150g.
-The combination of pre pressing, slow monitored pressure application, and use of 220u bags for structural support should be your biggest takeaways from this video.
- We utilized about 900 platen psi on this press (optimal force for bubble tends to be between 800-2,000 platen psi)
- Platen PSI is calculated by taking your total force (in this case, 8 tons or 16,000lbs of force) divided by the surface area of your bag (in this case 3"x6"= 18sqin) 16,000lbs/18sqin= 888 Platen PSI!
Lowtemp Industries is here to help you go solventless! Reach out with any questions you may have.
----------------------------------------------
Get the Rosin Press From this Video:
lowtemp-plates.com/collections/all-in-one/products/4x7-all-in-one-lowtemp-press?variant=7970085732396
----------------------------------------------
Daily Rosin Profit Calculator:
lowtemp-plates.com/pages/lowtemp-rosin-profit-calculator
----------------------------------------------
Contact Us:
lowtemp-plates.com/pages/contact-us
----------------------------------------------
Stay Connected:
Website: lowtemp-plates.com
Instagram: instagram.com/lowtemp.industries
Facebook: facebook.com/Lowtemp.Plates
TikTok: tiktok.com/@lowtemp.industries.co
X: twitter.com/Lowtemp_Indus










