How to Power a 100W Ham Radio with Portable Solar Panels @OH8STN
How to Power a 100W Ham Radio with Portable Solar Panels  @OH8STN
Uploaded September 2026 | Updated November 2026, 1 day ago
Learn how to power a 100W ham radio off-grid with portable solar panels, a LiFePO4 battery, and MPPT charge controllers. This practical ham radio solar power tutorial shows how to wire a portable 100W station step by step, including the battery, solar panels, charge controllers, and Powerpole connections. No electronics background required.

Hello Operators.
We start on the beach with the ATV and Icom IC-7300 Mk2, making a 100W SSB voice contact with a station in Ukraine. The IC-7300 Mk2 is transmitting at its full 100W output from a battery charged by portable solar panels. This demonstrates a portable off-grid ham radio power system working under field conditions. Then we go through how to wire the system yourself.

You’ll see how to connect two PowerFilm crystalline solar panels through two Genasun GV-10-Li-14.2V MPPT charge controllers to one Power Queen 50Ah LiFePO4 battery, using a Windcamp AP-8 power distribution board. We assemble the cables, crimp the connectors, check voltage, polarity, and continuity, and demonstrate both controllers charging the battery.

The goal is a portable power system for field radio operations and emergency communications, with every connection shown in practice.

EQUIPMENT AND DISCOUNT LINKS
PowerFilm crystalline solar panels from California PC & Peripherals
Use discount code: OH8STN

110W panel shown in this video:
californiapc.com/Portable-Solar-Chargers/PowerFilm-Solar-Foldable-Solar-Panels/F3-32F18.9VBLKS

135W panel shown in this video:
californiapc.com/Portable-Solar-Chargers/PowerFilm-Solar-Foldable-Solar-Panels/F3-40F23.6VBLKS

Genasun MPPT charge controllers, two used
Model: GV-10-Li-14.2V for 4S LiFePO4 batteries
Use discount code: 5forOH8STN

USA: Select GV-10-Li-14.2V-RETAIL under Lithium.
sunforgellc.com/product/gv-10

Europe:
https://genasun.eu/products/genasun-gv-10-lithium-14-2-volt-mppt

Power Queen 12.8V 50Ah LiFePO4 battery
Regional stores below. Use discount code: JULIANOH8STN
Affiliate links:

USA: ipowerqueen.com/?ref=0q1c0pan
Europe: ipowerqueen.de/?ref=732d60hj
Canada: ca.ipowerqueen.com/?ref=y0igztbu
UK: uk.ipowerqueen.com/?ref=k0j3c653

Windcamp AP-8 power distribution board
eBay affiliate link:
ebay.us/xDXLyQ

Affiliate disclosure: Purchases through links marked as affiliate links may earn me a commission at no additional cost to you.

BOOKS FOR YOUR OFF-GRID STATION
For more on planning and powering your own station, these books expand on the work demonstrated here. Purchasing my books supports the channel and these field tutorials.

Ham Radio Field Day on Solar Power:
amazon.com/dp/B0H6K18DK7

Off-Grid Power for Emergency Communications:
amazon.com/dp/9526564529

Find my books on your local Amazon marketplace or visit:
amazon.com/author/julian-oh8stn

WIRING AND TOOLS USED

* Solar panel cables with SAE connectors
* Cable for the controller-to-battery connections
* Powerpole connectors with 45A contacts
* Red and black housings for battery connections
* Yellow and black housings for solar panel connections
* Wire ferrules and ferrule crimping tool
* Powerpole contact crimping tool
* Wire stripper and cutters
* Screwdriver for charge controller terminals
* Multimeter for voltage, polarity, and continuity checks

Use cable rated for at least 10.5A with each Genasun charge controller. Size the battery cables for your station’s maximum simultaneous load.

RELATED OFF-GRID HAM RADIO POWER VIDEOS

DIY LiFePO4 Solar Generator for Portable Ham Radio
youtu.be/HgQ3m6rzJko

Portable Ham Radio Battery Pack DIY
youtu.be/YgKE8C_V1Y0

Off-Grid Solar Power for Portable Ham Radio
youtu.be/CAUamTA9G90

Portable Off-Grid Solar Storage Update | Fuses & Power Distribution
youtu.be/yJawygsz91s

Portable Solar Panel | PowerFilm Solar
youtu.be/hiA9C9H9GQk

CHAPTERS
00:00 How to power a 100W ham radio with solar
00:24 Icom IC-7300 Mk2 portable: 100W SSB contact with Ukraine
02:08 Portable ham radio solar power system
05:16 Genasun GV-10-Li-14.2V MPPT charge controllers
06:12 Ferrules and connector color coding
08:49 Preparing and crimping Powerpole contacts
13:57 Wiring the PowerFilm solar panels
17:15 Building the controller’s battery cable
25:41 Two completed charge controllers
26:08 Making SAE-to-Powerpole solar cables
31:05 Checking continuity and wiring
34:53 Testing the battery and solar panels
38:37 Connecting the first charge controller and panel
40:12 Connecting the second controller and panel
41:39 Windcamp AP-8 power distribution
42:38 SSB contact with Ukraine, continued

More field tests and tutorials:
oh8stn.org

73
Julian OH8STN

DESCRIPTION HASHTAGS
#oh8stn #hamradio #solarpower #offgridhamradio #portablehamradio #lifepo4 #emergencycommunications
How to Power a 100W Ham Radio with Portable Solar PanelsThe Arctic Circle #oh8stnOff-Grid Power for Emergency Communications on AmazonTough time with Winlink from the Arctic #oh8stnWhy NVIS Failed at a Finnish Backcountry Cabin | QRP WinlinkRadio Readiness Is Not EnoughQRP Ham Radio Contact | Icom IC-705 & JS8CallUltimate Ham Radio Disaster Battery with Wireless MonitoringWhat Peace Looks Like for Me | Ham RadioPortable Ham Radio Anywhere Anytime | MontageMeshtastic Yagi testing #shortsHam Radio Station on off-grid solar power
Off-Grid Ham Radio OH8STN |

How to Power a 100W Ham Radio with Portable Solar Panels

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER