Uploaded August 2021 | Updated September 2026, 1 day ago

---

Carry out dry block calibrations to keep devices such as thermostatic switches, RTDs, thermistors, thermocouples, thermometers and other temperature sensing equipment accurately calibrated.

In order to perform this calibration, you need the 753 or 754 documenting process calibrator and a Fluke calibration dry block or micro-bath with a communications port and a no modem cable with a 9-pin connector on one end and the LEMO pressure connection on the other.

Start watching the video at 0:28 to see how to perform the calibration in its entirety.

At ITM Instruments, we can calibrate your instruments for you if you don't have the time or space to do so. Just send us a request at bit.ly/3AfRRwN.

For complete information on this product, visit us at bit.ly/3yG7Qnq.
-----------------------------------------
Don’t forget to subscribe!
Connect with us to be the first to know about new products and promotions:
Website: itm.com
Email: information@ITM.com
Instagram: instagram.com/itm_instruments
Facebook: facebook.com/itminstruments
Twitter: twitter.com/ITMinstruments
LinkedIn: linkedin.com/company/itm-instruments