Uploaded February 2026 | Updated November 2026, 3 days ago
Fusion’s built-in thread tool doesn’t include E26 (Edison screw) light bulb threads, so in this Autodesk Fusion tutorial you’ll model accurate, curved E26 threads from scratch using IEC-standard dimensions. You’ll build a simple path setup, sketch the thread profile with the correct radii, then sweep and twist the profile to generate realistic threads you can 3D print or use in product design.
You’ll learn how to:
- Set up a hybrid design workflow and create a dedicated E26 threads component
- Use IEC dimensions to drive the model (major diameter, minor diameter, pitch, and thread height)
- Build a plane along a path and sketch the curved thread profile
- Sweep the profile and apply the correct twist using height and pitch
- Finish the base with fillets, a 60 degree taper for electrical contact, a top extension, and a clamping lip
Key dimensions used in the tutorial (for quick reference)
- Major diameter: 26 mm
- Minor diameter: 24.72 mm
- Pitch: 3.629 mm
- Thread section height: 16.3 mm
- Thread profile arc radius: 1.191 mm
- Bottom contact diameter example: 16 mm (range noted: 15.24 to 17.01)
- Bottom taper angle: 60 degrees
- Typical finishing values shown: 0.5 mm fillet, 0.5 mm shell, -1 mm cut
Chapters (timestamps)
00:00 Why Fusion needs a custom method for E26 curved threads
00:27 Set up the sketch path for the thread sweep
00:59 Define thread height from the standard (16.3 mm section)
01:12 Calculate circumference from the 26 mm major diameter and set pitch (3.629)
01:43 Create a plane along a path for the thread profile sketch
01:57 Sketch the E26 thread profile with arcs and constraints
02:41 Dimension the thread profile radius to 1.191 mm
03:24 Create the cylinder using the 24.72 mm minor diameter
03:49 Sweep and twist the threads using 360 x height / pitch
04:19 Fillet to match the rounded E26 thread form
04:36 Add the standardized bottom taper for electrical contact (60 degrees)
05:21 Build the top extension with an offset plane and extrusion
06:01 Add the top clamping lip (26 + 0.5) and join
06:27 Final fillets, shell settings, and cleanup for a finished E26 base
07:18 Cut the bottom and review the final E26 thread result
Fusion’s built-in thread tool doesn’t include E26 (Edison screw) light bulb threads, so in this Autodesk Fusion tutorial you’ll model accurate, curved E26 threads from scratch using IEC-standard dimensions. You’ll build a simple path setup, sketch the thread profile with the correct radii, then sweep and twist the profile to generate realistic threads you can 3D print or use in product design.
You’ll learn how to:
- Set up a hybrid design workflow and create a dedicated E26 threads component
- Use IEC dimensions to drive the model (major diameter, minor diameter, pitch, and thread height)
- Build a plane along a path and sketch the curved thread profile
- Sweep the profile and apply the correct twist using height and pitch
- Finish the base with fillets, a 60 degree taper for electrical contact, a top extension, and a clamping lip
Key dimensions used in the tutorial (for quick reference)
- Major diameter: 26 mm
- Minor diameter: 24.72 mm
- Pitch: 3.629 mm
- Thread section height: 16.3 mm
- Thread profile arc radius: 1.191 mm
- Bottom contact diameter example: 16 mm (range noted: 15.24 to 17.01)
- Bottom taper angle: 60 degrees
- Typical finishing values shown: 0.5 mm fillet, 0.5 mm shell, -1 mm cut
Chapters (timestamps)
00:00 Why Fusion needs a custom method for E26 curved threads
00:27 Set up the sketch path for the thread sweep
00:59 Define thread height from the standard (16.3 mm section)
01:12 Calculate circumference from the 26 mm major diameter and set pitch (3.629)
01:43 Create a plane along a path for the thread profile sketch
01:57 Sketch the E26 thread profile with arcs and constraints
02:41 Dimension the thread profile radius to 1.191 mm
03:24 Create the cylinder using the 24.72 mm minor diameter
03:49 Sweep and twist the threads using 360 x height / pitch
04:19 Fillet to match the rounded E26 thread form
04:36 Add the standardized bottom taper for electrical contact (60 degrees)
05:21 Build the top extension with an offset plane and extrusion
06:01 Add the top clamping lip (26 + 0.5) and join
06:27 Final fillets, shell settings, and cleanup for a finished E26 base
07:18 Cut the bottom and review the final E26 thread result










