Uploaded December 2025 | Updated November 2026, 4 days ago
In this video, we’ll walk you through how to manually fill the F-type tube to prime the pumps.
You need to do this if your Decent Espresso machine has been powered off for a while. This has caused the water inside to dry up, and the pump is having trouble sucking water up. You’ll notice this as follows:
- During the power up cycle, you can hear the pumps rattling, trying over and over to suck water up.
- The last yellow light on the GHC doesn’t light up.
This video is part of a series that we produce, helping our users self-repair their Decent Espresso Machine.
※ Only do this repair in consultation with Decent tech support
※ Doing otherwise might break your machine or void your warranty.
00:07 Tools
00:12 Power Disconnection
00:32 Remove External Components
01:14 Remove the Main Cover
01:36 Remove the hose clamp
02:07 Pull out the water level sensor tube
02:12 Pull out the F-type tube
02:19 Preparations to manually fill the tube
03:07 Inject water into the F-tube with a syringe
03:20 How to know if the pumps are primed well
03:28 What to do if the first priming failed
03:39 Re-connect the F-type tube
03:52 Re-attach the water level sensor tube
04:00 What to do if the priming didn’t work
04:21 What to do if the priming was successful
04:33 Re-attach the cable-tie
04:52 Re-attach the hose clamp
05:09 Contact us if you have questions
In this video, we’ll walk you through how to manually fill the F-type tube to prime the pumps.
You need to do this if your Decent Espresso machine has been powered off for a while. This has caused the water inside to dry up, and the pump is having trouble sucking water up. You’ll notice this as follows:
- During the power up cycle, you can hear the pumps rattling, trying over and over to suck water up.
- The last yellow light on the GHC doesn’t light up.
This video is part of a series that we produce, helping our users self-repair their Decent Espresso Machine.
※ Only do this repair in consultation with Decent tech support
※ Doing otherwise might break your machine or void your warranty.
00:07 Tools
00:12 Power Disconnection
00:32 Remove External Components
01:14 Remove the Main Cover
01:36 Remove the hose clamp
02:07 Pull out the water level sensor tube
02:12 Pull out the F-type tube
02:19 Preparations to manually fill the tube
03:07 Inject water into the F-tube with a syringe
03:20 How to know if the pumps are primed well
03:28 What to do if the first priming failed
03:39 Re-connect the F-type tube
03:52 Re-attach the water level sensor tube
04:00 What to do if the priming didn’t work
04:21 What to do if the priming was successful
04:33 Re-attach the cable-tie
04:52 Re-attach the hose clamp
05:09 Contact us if you have questions










