How To Make Something From Wood Step By Step @IBuildItScrapBin
How To Make Something From Wood Step By Step  @IBuildItScrapBin
Uploaded January 2021 | Updated November 2026, 5 days ago
Thought I would do a real time build (I just cut a few seconds out where I said something that made no sense whatsoever) minus the glue dry time and drilling the screw holes. Gives an idea for those who have no experience how long it takes and the steps involved in building a small box like this from scratch using just the table saw.
Read more in my blog entry: ibuildit.ca/blog/woodworking-step-by-step
Key points:
- make sure you saw is properly aligned with a good quality sharp blade. Don't just assume, check.
- start with a well defined goal - a plan with dimensions is best, but it's not the end of the world if the item is slightly smaller or bigger than intended when finished. Develop the ability to adapt as you go along.
- concentrate on breaking the project down into simple steps and follow those through to completion. Every woodworking project, regardless of how complex, is just a series of simple operations.
- make sample cuts. It's very important to know exactly what you are getting when you make the cuts on your finished parts.
- pay attention and don't be lazy. Woodworking isn't a race to the finish for most people. Take the time to do it right and you'll enjoy it much more.
- learn to rank the importance of the different factors of the project. For example: The type of wood used will be more important if overall appearance is near the top, but much further down if you are you are going to paint the project as the final finish. Hardwood is stronger than softwood, but not by a huge margin and often you won't need that extra strength.
- wood isn't steel or any other metal, so the margin of error while machining it will be much higher. Don't get hung up on making parts precisely when it's not needed. For example: The top and bottom panels of the box were supposed to be 1/4", but can be slightly thicker or thinner because you will cut the rabbet they fit into after you have the panels made. Or you can sand them down flush afterwards.
- learn about wood and the properties that make it different from other material. The top two are the grain structure / strength axis and how it reacts to moisture in the air. You'll need to work with both of these on every project and make allowances to deal with the effect they have.

Project plans for sale: ibuildit.ca/plans

Support this channel on Patreon: patreon.com/user?u=865843&ty=h

My main channel:
youtube.com/user/jpheisz

Website: ibuildit.ca
Facebook: facebook.com/I-Build-It-258048014240900
Instagram: instagram.com/i_build_it.ca
How To Make Something From Wood Step By StepI Said Id Never Use a Cyclone... What Happened?Hey there its Sunday morning!Can Your Chisel Do This? #shortsReal Time Card Scraper Tune Up - From Dull as Dirt to Shavings SharpThe Craw! The Craw!!Can 3d Printing Replace Woodworking? Mild RantSorry, No Drill Press Mods... Yet and The Alternate History we are Stuck inI Have To Stop This Here...Long Vs Short and Scaredy-CatsWhat Is This?? and More Stuff That Annoys MeMy Politics Revealed! Prepare To Be Shocked!!
I Build It Scrap Bin |

How To Make Something From Wood Step By Step

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER