How to make solder remover - copper desoldering - Homemade solder wick / braid / #diy @LifeKaki
How to make solder remover - copper desoldering - Homemade solder wick / braid / #diy  @LifeKaki
Uploaded July 2023 | Updated November 2026, 5 days ago
Using a TV cable's copper core as a makeshift desoldering braid can be helpful for small soldering jobs, but for more extensive or delicate electronic work, it's advisable to invest in proper desoldering tools and materials for better results.

To create a solder remover using a TV cable, you'll be using the inner copper wire as the solder remover. The inner wire of a TV cable is typically made of copper, which can act as a desoldering braid or wick to remove excess solder. Here's how you can do it:

Materials:

TV cable with a copper core (an old or unused cable will work)
Wire cutters or a utility knife
Safety goggles and gloves (optional but recommended)
Soldering iron and soldering station
Steps:

Prepare the cable: Use wire cutters or a utility knife to carefully strip the TV cable's outer insulation, exposing the inner copper wire. You should be left with the copper core visible and accessible.

Straighten the wire: Straighten the copper wire as much as possible to make it easier to work with during desoldering.

Preheat the soldering iron: Turn on your soldering iron and allow it to reach its operating temperature. It's essential to use a soldering iron with a fine tip for precision work.

Apply the soldering iron: Once your soldering iron is heated, touch the tip to the solder joint you want to remove. The heat from the soldering iron will melt the solder, allowing it to flow onto the exposed copper wire.

Desolder the joint: While the solder is molten, quickly remove the soldering iron and place the exposed copper wire from the TV cable directly on the molten solder. The copper wire will act as a desoldering braid or wick, absorbing the molten solder.

Clean the wire: After absorbing the solder, remove the copper wire from the joint. If there's still some solder left, you can clean the wire by wiping it on a damp sponge or cloth. Repeat the process if necessary until the joint is free of excess solder.

How to make tool to remove the braid from the wires: youtu.be/4nDWx1l5Mjs

Don't miss new videos!
Subscribe to our LifeKaki Channel: youtube.com/@LifeKaki

HOW TO MAKE BEADS FROM PLASTIC BOTTLES: youtu.be/BTZsCT36pFw

Useful homemade from old brush cleaning: youtu.be/lNwUt0vMjdk
मिलाप हटावे वाला बा.

#diy #ideas #solder

How to make solder remover - copper desoldering - homemade solder wick / braid
How to make solder remover - copper desoldering - Homemade solder wick / braid / #diyHow to Fix Subwoofer Buzzing & Hum - Capacitor Replacement Guide (Component Level Repair)DIY TV Antenna from a Wire Hanger | HDTV & DVB-T2 Channels in MinutesThe Professional Extension Cord Storage Method: No More TanglesHow to Replace a Cabinet Hinge in 30 Seconds | Easy DIY FixNight lamp from plastic bottles - YOU MUST SEE - How to make / Plastic bottle craft ideasMake Your Bike Comfortable - Wide Saddle Upgrade & Review (DIY Install)Rechargeable Motion Sensor LED | Practical Wardrobe Lighting 💡PVC Pipe to LED Heart Lamp | Functional DIY Night LightSecure a Chain Without Welding | Practical RepairAmazing Idea from Leftover PVC Pipe! 💘How to Change the Circle on the Grinder without a KEY | Two Ways - To easy!
LifeKaki |

How to make solder remover - copper desoldering - Homemade solder wick / braid / #diy

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER