Uploaded December 2025 | Updated September 2026, 2 weeks ago
In this video, @MaiseDesignsDice shows you how she creates perfectly aligned two-part molds using Amazing Mold Maker, sharing her go-to methods for prepping masters, forming registration keys, and using mold releases for clean, professional results.
If two-part molds have ever felt intimidating, this video breaks it all down with expert advice, clever tricks, and confidence-boosting tips that make the whole process feel achievable no matter your experience level.
Why Watch This Video?
* A full walkthrough of building a clean, accurate two-part silicone mold from start to finish
* Insider techniques for prepping masters and creating crisp registration keys for perfect alignment
* Bubble-busting strategies in action — plus when and why to bring in the pressure pot
🧪 How to Use Your Finished Two-Part Mold
This style of mold doesn’t include a pour spout, so here’s how to cast with it once both halves are done:After your two-part mold has fully cured, open the mold and fill only the bottom half with your mixed resin, pouring all the way up to the top of the cavity. Once filled, carefully place the top half back on, align the registration keys, and secure the mold closed with rubber bands. From there, you can place the assembled mold into a pressure pot for a bubble-free finish.
🛍️ Shop the Products
Amazing Mold Maker: bit.ly/3XFmBFv
🧰 Tools & Supplies Used
* Baby powder
* Petroleum jelly
* Molding house
* Contact paper
* Cuticle trimmer
* Rhinestones (for face caps)
* Hot glue gun
* Brush
* Sharpie
🙌 Shoutout to Maise Designs Dice
Follow them on Instagram: @maisedesignsdice
Visit the shop: maisedesigns.com
Check out their TikTok: tiktok.com/@maisedesignsdiceSubscribe on YouTube: youtube.com/@MaiseDesignsDice
💬 Jump into the Comments
👉 Have you ever made a two-part mold before?
👉 What’s the most detailed object you want to mold?
👉 Want a full casting tutorial next? Let us know!
---------------
✨ Our Socials ✨
Facebook: facebook.com/Alumilite
Instagram: instagram.com/alumiliteco
Pinterest: pinterest.com/alumiliteco/_shop
Twitter: twitter.com/alumiliteco
TikTok: tiktok.com/@alumiliteco?
Visit our website at: alumilite.com
If you have any questions at all about our products, who we are, ideas on how to make things, or people we should do a project with please reach out to us! For any technical help, you can call our customer service at 269-488-4000 or email them at info@alumilite.com
In this video, @MaiseDesignsDice shows you how she creates perfectly aligned two-part molds using Amazing Mold Maker, sharing her go-to methods for prepping masters, forming registration keys, and using mold releases for clean, professional results.
If two-part molds have ever felt intimidating, this video breaks it all down with expert advice, clever tricks, and confidence-boosting tips that make the whole process feel achievable no matter your experience level.
Why Watch This Video?
* A full walkthrough of building a clean, accurate two-part silicone mold from start to finish
* Insider techniques for prepping masters and creating crisp registration keys for perfect alignment
* Bubble-busting strategies in action — plus when and why to bring in the pressure pot
🧪 How to Use Your Finished Two-Part Mold
This style of mold doesn’t include a pour spout, so here’s how to cast with it once both halves are done:After your two-part mold has fully cured, open the mold and fill only the bottom half with your mixed resin, pouring all the way up to the top of the cavity. Once filled, carefully place the top half back on, align the registration keys, and secure the mold closed with rubber bands. From there, you can place the assembled mold into a pressure pot for a bubble-free finish.
🛍️ Shop the Products
Amazing Mold Maker: bit.ly/3XFmBFv
🧰 Tools & Supplies Used
* Baby powder
* Petroleum jelly
* Molding house
* Contact paper
* Cuticle trimmer
* Rhinestones (for face caps)
* Hot glue gun
* Brush
* Sharpie
🙌 Shoutout to Maise Designs Dice
Follow them on Instagram: @maisedesignsdice
Visit the shop: maisedesigns.com
Check out their TikTok: tiktok.com/@maisedesignsdiceSubscribe on YouTube: youtube.com/@MaiseDesignsDice
💬 Jump into the Comments
👉 Have you ever made a two-part mold before?
👉 What’s the most detailed object you want to mold?
👉 Want a full casting tutorial next? Let us know!
---------------
✨ Our Socials ✨
Facebook: facebook.com/Alumilite
Instagram: instagram.com/alumiliteco
Pinterest: pinterest.com/alumiliteco/_shop
Twitter: twitter.com/alumiliteco
TikTok: tiktok.com/@alumiliteco?
Visit our website at: alumilite.com
If you have any questions at all about our products, who we are, ideas on how to make things, or people we should do a project with please reach out to us! For any technical help, you can call our customer service at 269-488-4000 or email them at info@alumilite.com
