Uploaded July 2026 | Updated September 2026, 2 weeks ago
Script/command -
NAME "Hostile Neural Networks Setup"
EVERY 20 TICKS DO
INPUT fe:: FROM PowerSource bottom side
INPUT hostilenetworks:prediction_matrix FROM Pred
OUTPUT fe:: TO Sim
OUTPUT fe:: to lootfab
output hostilenetworks:prediction_matrix to Sim
forget
INPUT FROM Sim
OUTPUT hostilenetworks:end_prediction TO ResultDrawer
OUTPUT to witherPDrawer
output to lootfab
forget
input from witherPDrawer
output retain 5 to each lootfab
forget
input nether_star from lootfab
output nether_star to starDrawer
END
Basic version:
26 inventory cable from SFM
16 simulation chamber
16 wither data model
5 loot fabricator
4 drawer
1 factory manager
1 factory manager program disc
1 label gun
1 energy cube
a lot of prediction matrix
I'll show you how to make a Nether Star farm in the ATM 10 modpack.
The farm I'm about to show you is the exact one I used myself during my modpack playthrough to get the required amount of Nether Stars.
To do this, we will need these resources.
You can also find the full list of them in the description below.
To start, place down a Factory Manager.
And connect the Inventory Cables from SFM like this.
Now, place down our Energy Cube—I'm using a Creative Energy Cube, but you will need to power your Energy Cube with your own energy source.
Next, place down the Simulation Chambers.
As well as the Loot Fabricators.
Next, take our Factory Manager Program Disc.
And insert it into the Factory Manager.
Now, click the "Edit" button.
And paste the code right there—you can also find this code in the description below.
Next, grab a Label Gun.
Shift-right-click with it on the Factory Manager.
Then, simply right-click.
And as you can see, we have a list.
Select "power source" and click on the Energy Cube.
Next, select "pred" and click on the Drawer.
Then, select "resultDrawer" and click on the Drawer.
After that, select "starDrawer" and click on the Drawer again.
Finally, select "witherPDrawer" and click on the last Drawer.
Now, click on "Sim" and select all of our Simulation Chambers.
And the last thing left is "lootfab," where we must select all of our Loot Fabricators.
That's all.
Now, we just need to put Prediction Matrices into the drawer we labeled as "pred."
And inside each Simulation Chamber, you need to place at least a Basic Wither Data Model.
That's everything.
The energy is flowing.
And the Prediction Matrices have started filling up the Simulation Chambers.
Now, once a Wither Prediction is generated, we need to go into each Loot Fabricator and select the Nether Star option.
And after that, the drawer we chose for Nether Stars will start filling up.
That's all.
Thanks for watching. Goodbye.
Script/command -
NAME "Hostile Neural Networks Setup"
EVERY 20 TICKS DO
INPUT fe:: FROM PowerSource bottom side
INPUT hostilenetworks:prediction_matrix FROM Pred
OUTPUT fe:: TO Sim
OUTPUT fe:: to lootfab
output hostilenetworks:prediction_matrix to Sim
forget
INPUT FROM Sim
OUTPUT hostilenetworks:end_prediction TO ResultDrawer
OUTPUT to witherPDrawer
output to lootfab
forget
input from witherPDrawer
output retain 5 to each lootfab
forget
input nether_star from lootfab
output nether_star to starDrawer
END
Basic version:
26 inventory cable from SFM
16 simulation chamber
16 wither data model
5 loot fabricator
4 drawer
1 factory manager
1 factory manager program disc
1 label gun
1 energy cube
a lot of prediction matrix
I'll show you how to make a Nether Star farm in the ATM 10 modpack.
The farm I'm about to show you is the exact one I used myself during my modpack playthrough to get the required amount of Nether Stars.
To do this, we will need these resources.
You can also find the full list of them in the description below.
To start, place down a Factory Manager.
And connect the Inventory Cables from SFM like this.
Now, place down our Energy Cube—I'm using a Creative Energy Cube, but you will need to power your Energy Cube with your own energy source.
Next, place down the Simulation Chambers.
As well as the Loot Fabricators.
Next, take our Factory Manager Program Disc.
And insert it into the Factory Manager.
Now, click the "Edit" button.
And paste the code right there—you can also find this code in the description below.
Next, grab a Label Gun.
Shift-right-click with it on the Factory Manager.
Then, simply right-click.
And as you can see, we have a list.
Select "power source" and click on the Energy Cube.
Next, select "pred" and click on the Drawer.
Then, select "resultDrawer" and click on the Drawer.
After that, select "starDrawer" and click on the Drawer again.
Finally, select "witherPDrawer" and click on the last Drawer.
Now, click on "Sim" and select all of our Simulation Chambers.
And the last thing left is "lootfab," where we must select all of our Loot Fabricators.
That's all.
Now, we just need to put Prediction Matrices into the drawer we labeled as "pred."
And inside each Simulation Chamber, you need to place at least a Basic Wither Data Model.
That's everything.
The energy is flowing.
And the Prediction Matrices have started filling up the Simulation Chambers.
Now, once a Wither Prediction is generated, we need to go into each Loot Fabricator and select the Nether Star option.
And after that, the drawer we chose for Nether Stars will start filling up.
That's all.
Thanks for watching. Goodbye.
