NightHawkInLight | How to Make an Explosion Simulator @Nighthawkinlight | Uploaded 10 years ago | Updated 5 minutes ago
A great way to support my videos is to support my sponsors, and in this case it's easy and free! Check out the new Turkish Airlines video Here: http://bit.ly/ImPa2s
This video demonstrates a simple design I came up with for safely simulating an explosion, such as what might be used in special effects. The most valuable piece of information this video demonstrates is probably how to modify a sprinkler valve, which is useful for all sorts of air powered projects. One problem that might arise in the valve modification is that the hose fitting threaded into the top might leak around the threads, in which case some epoxy can be applied around the fitting on the inside of the valve housing which should seal it pretty securely.
My facebook page: facebook.com/pages/NightHawkInLight/195900927121937 #NightHawkInLight
-~-~~-~~~-~~-~-
Check out my latest video: "How To View Invisible Air Currents With Lasers"
youtube.com/watch?v=K94Cc21KEIA
-~-~~-~~~-~~-~-
A great way to support my videos is to support my sponsors, and in this case it's easy and free! Check out the new Turkish Airlines video Here: http://bit.ly/ImPa2s
This video demonstrates a simple design I came up with for safely simulating an explosion, such as what might be used in special effects. The most valuable piece of information this video demonstrates is probably how to modify a sprinkler valve, which is useful for all sorts of air powered projects. One problem that might arise in the valve modification is that the hose fitting threaded into the top might leak around the threads, in which case some epoxy can be applied around the fitting on the inside of the valve housing which should seal it pretty securely.
My facebook page: facebook.com/pages/NightHawkInLight/195900927121937 #NightHawkInLight
-~-~~-~~~-~~-~-
Check out my latest video: "How To View Invisible Air Currents With Lasers"
youtube.com/watch?v=K94Cc21KEIA
-~-~~-~~~-~~-~-
![How To Make a DIY Tornado Machine [Full Tutorial] - NightHawkInLight](https://i.ytimg.com/vi/zoQr-pDaQNw/hqdefault.jpg "How To Make a DIY Tornado Machine [Full Tutorial] - NightHawkInLight
How to make a tornado machine with an open air vortex! Youve probably got just enough time to build this before Halloween. Most other designs that use only a single fan require the tornado to be fully enclosed, which means you cant actually reach in and touch it. With this design you can play with the vortex hands on. Consider supporting my channel on Patreon! Link: https://www.patreon.com/NightHawkProjects
The fan I used for this project can be found with a search for 6 Inch Inline Duct Fan. That will probably be the most expensive part at around $60-80. I run the fan on its lowest setting so you may be able to get away with using a 4 inch fan which would be less expensive, but it may be louder as it would run at higher speeds for the same airflow.
The ultrasonic foggers are the other unusual part used in this project, and you can find those here (this is an affiliate link): http://ebay.to/2aQK5Sk
The music used in this video is the song Natural by Dolphin-Mind
Thanks for watching!")
