Uploaded February 2017 | Updated September 2026, 1 hour ago
In this video I show you who to make a device to crush your own stone to use for stone inlays.
All you need are 3 parts from the plumbing section at your local home center.
I used a 2 inch pipe end cap, a 3/4 inch pipe end cap and a 3/4 inch nipple connector.
For the handle I used a piece of wood from an old bed post and turned it to shape on the lathe.
You can crush the stone to whatever grit you want for the desired effect you want on your project.
I strongly recommend using safety goggles when crushing stone, there will be some flying pieces.
Music:
Not me by Silent Partner, YouTube audio library.
In this video I show you who to make a device to crush your own stone to use for stone inlays.
All you need are 3 parts from the plumbing section at your local home center.
I used a 2 inch pipe end cap, a 3/4 inch pipe end cap and a 3/4 inch nipple connector.
For the handle I used a piece of wood from an old bed post and turned it to shape on the lathe.
You can crush the stone to whatever grit you want for the desired effect you want on your project.
I strongly recommend using safety goggles when crushing stone, there will be some flying pieces.
Music:
Not me by Silent Partner, YouTube audio library.
