How to Make a Silicone Brush-On Mold | Mold Making 101 @smoothon
How to Make a Silicone Brush-On Mold | Mold Making 101  @smoothon
Uploaded November 2026 | Updated November 2026, 3 hours ago
For complex, detailed models, a brush-on mold with a rigid support shell is a practical way to capture every detail while saving material. Follow along step by step as we take you through the full process: from planning and applying each layer of Rebound 25 silicone to building a two-part Plasti-Paste II support shell and casting a reproduction with Smooth-Cast 305.​‌

You'll learn:
✅ Study your model and plan the cut seam and parting line to avoid mechanical lock
✅ How to apply detail, pigmented, and thickened layers for full coverage
✅ How to use Thi-Vex to fill undercuts and build a cut seam
✅ How to build a two-part support shell with registration keys
✅ How to cut the mold open and cast with urethane resin​

Find a Distributor: smooth-on.com/distributors
‌
Materials featured in this video:
Rebound 25 Brush-On Silicone: smooth-on.com/products/rebound-25
Plasti-Paste II Urethane Plastic: smooth-on.com/products/plasti-paste-ii
Thi-Vex Silicone Thickener: smooth-on.com/products/thi-vex
Silc-Pig Silicone Pigments: smooth-on.com/product-line/silc-pig
Ease Release 200 Release Agent: smooth-on.com/products/ease-release-200
Sonite Wax Release Agent: smooth-on.com/products/sonite-wax
Smooth-Cast Urethane Resins: smooth-on.com/product-line/smooth-cast
So-Strong Urethane Colorants: smooth-on.com/product-line/strong
Sculptex Clay: chavant.com/sculptex

Adult Supervision Required
Keep Out Of Reach Of Children
---
Make It Now! with Smooth-On
smooth-on.com
facebook.com/SmoothOn
twitter.com/SmoothOn
instagram.com/SmoothOn
How to Make a Silicone Brush-On Mold | Mold Making 101How To Make Hand Shaped Soap Using Accu-Cast AlginateMold Boxes with Plastic Board and Plexiglass | Mold Making 101Create Beautiful Hand Castings With The Accu-Cast Family Hand Casting Kit! #smoothon #handcasting3 Ways to Make Silicone Texture StampsSOMETHING ✨BRIGHT✨ IS COMINGHow To Create a Marble Effect In Castings Using Matrix™ Dryve™Release Agents 101 |  AquaconMaking An Epoxy Mold For A Life Size Slimer PropMaking a Cold Cast Copper Pumpkin Halloween PinHow To Make A Fake Bloody Hand Prop Using Alja-Safe and Dragon Skin 10NVHow To Make A Silicone Candle Mold For Valentines Day #smoothon #moldmaking #shorts
Smooth-On |

How to Make a Silicone Brush-On Mold | Mold Making 101

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER