Uploaded May 2015 | Updated November 2026, 22 hours ago
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html
This tutorial shows how to make a compact, lightweight waterproof container out of two plastic bottle caps and necks. By cutting the threaded necks off two plastic bottles just below the retaining ring, sanding or trimming the cut edges flat, and gluing them back-to-back, you get a durable, sealed capsule that twists open from either end. It is an easy upcycling project for storing strike-anywhere matches, tinder, pills, cash, or small fishing gear in a camping, hiking, cycling, or everyday carry survival kit.
Matches Shown in the Video: https://link.amazon/B0bigD6BC
How It Works
1. Cut the threaded necks off two identical plastic bottles just beneath the protruding collar ring.
2. Sand or trim the cut bottoms completely flat, so they sit flush against each other with maximum surface area.
3. Bond the two flat bases together using a strong plastic adhesive or two-part epoxy, let it cure completely, and screw both caps on tight for a watertight seal.
Music: YouTube Audio Library
Track: Donors
Artist: Letter Box
creativecommons.org/licenses/by/3.0
#SurvivalGear #DIYContainer #Bushcraft
©Von Malegowski. All Rights Reserved.
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html
This tutorial shows how to make a compact, lightweight waterproof container out of two plastic bottle caps and necks. By cutting the threaded necks off two plastic bottles just below the retaining ring, sanding or trimming the cut edges flat, and gluing them back-to-back, you get a durable, sealed capsule that twists open from either end. It is an easy upcycling project for storing strike-anywhere matches, tinder, pills, cash, or small fishing gear in a camping, hiking, cycling, or everyday carry survival kit.
Matches Shown in the Video: https://link.amazon/B0bigD6BC
How It Works
1. Cut the threaded necks off two identical plastic bottles just beneath the protruding collar ring.
2. Sand or trim the cut bottoms completely flat, so they sit flush against each other with maximum surface area.
3. Bond the two flat bases together using a strong plastic adhesive or two-part epoxy, let it cure completely, and screw both caps on tight for a watertight seal.
Music: YouTube Audio Library
Track: Donors
Artist: Letter Box
creativecommons.org/licenses/by/3.0
#SurvivalGear #DIYContainer #Bushcraft
©Von Malegowski. All Rights Reserved.










