Uploaded November 2026 | Updated November 2026, 2 hours ago
Temu Christmas lites:
share.temu.com/Ijw85uh9zJA
In this video I turn a piece of western red cedar into a lit Christmas snow scene with a Christmas gnome, a little windy day tree and Christmas lights.
I start by blocking out the cedar into a mountain shape with a chainsaw, then seal it with satin clear coat first so the cedar oil doesn't bleed through the white paint. After a few days drying I paint it white, screw on my windy day tree, and drill two holes with a 1-5/8 inch Forstner bit for the tea lights.
Then I add the plug-in colour-changing Christmas lights, hot glue them around the base, paint over the black wire, dry brush the tree so it looks snow dusted, and cover everything in my homemade fake snow. A few days later, once the snow is hard, I brush on Mod Podge and glitter, add some little presents, and light the whole thing up in the dark.
If you don't have thick wood or a chainsaw, you can build a base the same way from staggered 1x4s or 2x4s, it all gets painted and covered in snow anyway. And always test your lights before you glue them in!
Kutzall carving burrs I use link,
๐
kutzall.com/discount/CFUSION5?aff=24
All the carving tools I use are in this Amazon shop listed below๐
As an Amazon Associate I earn from qualifying purchases.
amazon.com/shop/carvingfusionbyjordyjohnson?ref=inf_own_carvingfusionbyjordyjohnson_cp
If u wanted to buy me a coffee here is a link to my PayPal๐
paypal.me/carvingfusion
Shirts and gear
jordy-johnson-shop.fourthwall.com
HERE is the link for the BP-Hst
That had 2 handpieces
Use code CARVINGFUSION TO SAVE 10%
ramprodinc.com/bp-hst-set-with-truflex-handpiece-and-pedal
Here is the link for the Ram iCube micro motor
ramprodinc.com/icube-45-sets
Here is the Amazon link for the dremel 4000
amzn.to/48V7EDZ
Dremel flex shaft on amazon
amzn.to/40PfxIW
Dremel 3 set collets 1/8 and 2 other smaller sizes.
amzn.to/48QbApD
Wen on off foot pedal on amazon.
amzn.to/3CGf5me
Wen rotary tool with flex shaft amazon.
amzn.to/3Cy7hD8
10 pcs aluminum cutters on amazon
amzn.to/3CretAU
20 pcs metal working bits, 10 big 10 small.
amzn.to/3AGx4IR
Wall tile cutters bits.
amzn.to/4ey4YNU
Wood burning set Amazon.
amzn.to/3AKh0FX
Cheap Chinese 3 point cutters.
amzn.to/4hVbtNp
Butane torch.
amzn.to/48ShZ3y
Makita die grinder/beginners
amzn.to/4i6zG3J
Makita 800c die grinder /PRO
amzn.to/3Z8vwkg
VEVOR die grinder:
amzn.to/3AX1neh
6 pcs sanding mandrels:
amzn.to/4fT7sXV
3m Scotch-Brite for sanding mandrels
amzn.to/491r227
#woodcarving #christmasgnome #christmaslights #christmasscene #beginnerwoodcarving #carvingfusion #woodworking #christmascrafts #diychristmas #gnome
Temu Christmas lites:
share.temu.com/Ijw85uh9zJA
In this video I turn a piece of western red cedar into a lit Christmas snow scene with a Christmas gnome, a little windy day tree and Christmas lights.
I start by blocking out the cedar into a mountain shape with a chainsaw, then seal it with satin clear coat first so the cedar oil doesn't bleed through the white paint. After a few days drying I paint it white, screw on my windy day tree, and drill two holes with a 1-5/8 inch Forstner bit for the tea lights.
Then I add the plug-in colour-changing Christmas lights, hot glue them around the base, paint over the black wire, dry brush the tree so it looks snow dusted, and cover everything in my homemade fake snow. A few days later, once the snow is hard, I brush on Mod Podge and glitter, add some little presents, and light the whole thing up in the dark.
If you don't have thick wood or a chainsaw, you can build a base the same way from staggered 1x4s or 2x4s, it all gets painted and covered in snow anyway. And always test your lights before you glue them in!
Kutzall carving burrs I use link,
๐
kutzall.com/discount/CFUSION5?aff=24
All the carving tools I use are in this Amazon shop listed below๐
As an Amazon Associate I earn from qualifying purchases.
amazon.com/shop/carvingfusionbyjordyjohnson?ref=inf_own_carvingfusionbyjordyjohnson_cp
If u wanted to buy me a coffee here is a link to my PayPal๐
paypal.me/carvingfusion
Shirts and gear
jordy-johnson-shop.fourthwall.com
HERE is the link for the BP-Hst
That had 2 handpieces
Use code CARVINGFUSION TO SAVE 10%
ramprodinc.com/bp-hst-set-with-truflex-handpiece-and-pedal
Here is the link for the Ram iCube micro motor
ramprodinc.com/icube-45-sets
Here is the Amazon link for the dremel 4000
amzn.to/48V7EDZ
Dremel flex shaft on amazon
amzn.to/40PfxIW
Dremel 3 set collets 1/8 and 2 other smaller sizes.
amzn.to/48QbApD
Wen on off foot pedal on amazon.
amzn.to/3CGf5me
Wen rotary tool with flex shaft amazon.
amzn.to/3Cy7hD8
10 pcs aluminum cutters on amazon
amzn.to/3CretAU
20 pcs metal working bits, 10 big 10 small.
amzn.to/3AGx4IR
Wall tile cutters bits.
amzn.to/4ey4YNU
Wood burning set Amazon.
amzn.to/3AKh0FX
Cheap Chinese 3 point cutters.
amzn.to/4hVbtNp
Butane torch.
amzn.to/48ShZ3y
Makita die grinder/beginners
amzn.to/4i6zG3J
Makita 800c die grinder /PRO
amzn.to/3Z8vwkg
VEVOR die grinder:
amzn.to/3AX1neh
6 pcs sanding mandrels:
amzn.to/4fT7sXV
3m Scotch-Brite for sanding mandrels
amzn.to/491r227
#woodcarving #christmasgnome #christmaslights #christmasscene #beginnerwoodcarving #carvingfusion #woodworking #christmascrafts #diychristmas #gnome










