Uploaded October 2019 | Updated November 2026, 3 hours ago
Bar plots let you view categorical variables as bars with heights based on the count of records within each category or some other summary value.
Code used in this clip:
# Load ggplot2 and data
library(tidyverse)
data <- mtcars
data$cyl <- as.factor(data$cyl)
# Bar plot in base R
barplot( table(data$cyl) )
# Bar plot in ggplot2
data %>% ggplot(aes(x = cyl)) +
geom_bar()
# Bar plot with swapped axes
data %>% ggplot(aes(x = cyl)) +
geom_bar(aes(fill = cyl)) +
coord_flip()
# Create a summary table of avg mpg by cylindar
table2 <- data %>% group_by(cyl) %>%
summarize(avg_mpg = mean(mpg))
table2
# Bar plot with bar height set to a summary value
table2 %>% ggplot(aes(x = cyl, y = avg_mpg)) +
geom_bar(aes(fill = cyl))
Code Clips are basic code explanations in 3 minutes or less. They are intended to be short reference guides that provide quick breakdowns and copy/paste access to code needed to accomplish common data science tasks. Think Stack Overflow with a video explanation.
* Note: YouTube does not allow greater than or less than symbols in the text description, so the code above may not be exactly the same as the code shown in the video! For R that means I may use = for assignment and the special Unicode large < and > symbols in place of the standard sized ones for dplyr pipes and comparisons. These special symbols should work as expected for R code on Windows, but may need to be replaced with standard greater than and less than symbols for other operating systems.
Bar plots let you view categorical variables as bars with heights based on the count of records within each category or some other summary value.
Code used in this clip:
# Load ggplot2 and data
library(tidyverse)
data <- mtcars
data$cyl <- as.factor(data$cyl)
# Bar plot in base R
barplot( table(data$cyl) )
# Bar plot in ggplot2
data %>% ggplot(aes(x = cyl)) +
geom_bar()
# Bar plot with swapped axes
data %>% ggplot(aes(x = cyl)) +
geom_bar(aes(fill = cyl)) +
coord_flip()
# Create a summary table of avg mpg by cylindar
table2 <- data %>% group_by(cyl) %>%
summarize(avg_mpg = mean(mpg))
table2
# Bar plot with bar height set to a summary value
table2 %>% ggplot(aes(x = cyl, y = avg_mpg)) +
geom_bar(aes(fill = cyl))
Code Clips are basic code explanations in 3 minutes or less. They are intended to be short reference guides that provide quick breakdowns and copy/paste access to code needed to accomplish common data science tasks. Think Stack Overflow with a video explanation.
* Note: YouTube does not allow greater than or less than symbols in the text description, so the code above may not be exactly the same as the code shown in the video! For R that means I may use = for assignment and the special Unicode large < and > symbols in place of the standard sized ones for dplyr pipes and comparisons. These special symbols should work as expected for R code on Windows, but may need to be replaced with standard greater than and less than symbols for other operating systems.




![How To Get Absolute Values in Python
abs() is a Python built in function that finds the absolute value of a number. abs() can be combined with map() to get the absolute values of all numbers in a list and abs() can be run on numpy arrays and pandas columns.
Code used in this video:
# Check absolute value with abs()
x = -5
abs(x)
# Calculate the absolute value of every element in a list
x = [4, 5, -3, -6, -2, 6]
[*map(abs, x)]
# Calculate the absolute vaule of an array
import numpy as np
x = np.array(x)
abs(x)
# Get the absolute value of a Pandas column
import pandas as pd
df = pd.DataFrame({col1:x})
print(df)
abs(df[col1])
* Note: YouTube does not allow greater than or less than symbols in the text description, so the code above will not be exactly the same as the code shown in the video! I will use Unicode large < and > symbols in place of the standard sized ones. How To Get Absolute Values in Python](https://i.ytimg.com/vi/Y8R0ZG9QbHY/mqdefault.jpg)


![How to Spread Columns in Pandas (Python)
↓ Code Available Below! ↓
This video shows how to spread data using the pivot function in the pandas library for Python, which allows you transform data in a long format into data in a wide format. Manipulating data with gather and spread operations (also known as melt and pivot) is a common data preprocessing task.
If you find this video useful, like, share and subscribe to support the channel!
► Subscribe: https://www.youtube.com/c/DataDaft?sub_confirmation=1
Code used in this Python Code Clip:
import pandas as pd
data = pd.DataFrame({character: [Goku,Vegeta, Nappa,Gohan,Piccolo],
uniform color: [orange, blue, black, orange, purple],
saiyan: [12000, 16000, 4000, 1500, 3000],
frieza: [150000000, 3000000, 4000, 75000, 1200000],
cell: [1000000000, 1000000000, 4000, 2000000000, 300000000],
buu: [4000000000, 2500000000, 4000, 5000000000, 500000000]})
# Put data into a long format
data = data.melt(id_vars = [character, uniform color],
value_vars = [saiyan,frieza,cell,buu],
var_name = saga,
value_name = power level)
data
# Spread a key column and its associated values with df.pivot()
data = data.pivot(index=[character, uniform color], # Columns that will not change
columns=saga, # Column holding new column names/categories
values=power level) # Name of value column to spread
data
# Remove the multi-index
data = data.reset_index()
data.columns.name = None
data
** Note: YouTube does not allow greater than or less than symbols in the text description, so the code above will not be exactly the same as the code shown in the video! I will use Unicode large < and > symbols in place of the standard sized ones. .
⭐ Kite is a free AI-powered coding assistant that integrates with popular editors and IDEs to give you smart code completions and docs while you’re typing. It is a cool application of machine learning that can also help you code faster! Check it out here: https://www.kite.com/get-kite/?utm_medium=referral&utm_source=youtube&utm_campaign=datadaft&utm_content=description-only How to Spread Columns in Pandas (Python)](https://i.ytimg.com/vi/YtFkSXXpMF4/mqdefault.jpg)


![How to Sort a Data Frame by a Column in Pandas
↓ Code Available Below! ↓
This video shows how to sort the rows of a pandas data frame by the values of a column. Sorting or ordering data by the values in a particular column can be a useful way to rearrange data in a logical way and allow you to focus on data records that are at the extremes of a certain variable.
If you find this video useful, like, share and subscribe to support the channel!
► Subscribe: https://www.youtube.com/c/DataDaft?sub_confirmation=1
Code used in this Python Code Clip:
import pandas as pd
import statsmodels.api as sm #(To access mtcars dataset)
mtcars = sm.datasets.get_rdataset(mtcars, datasets, cache=True).data
mtcars.head()
# Sort a data frame by a column with df.sort_values()
mtcars.sort_values(by = [mpg], # Row or columns names to sort by
axis = 0, # Sort Rows axis = 0
ascending=True) # Sort ascending or descending?
# Sort by multiple columns
mtcars.sort_values(by = [cyl, mpg], # Multiple column sorting
axis = 0, # Sort rows; axis = 0
ascending=[True, False]) # Sort ascending or descending?
** Note: YouTube does not allow greater than or less than symbols in the text description, so the code above will not be exactly the same as the code shown in the video! I will use Unicode large < and > symbols in place of the standard sized ones. .
⭐ Kite is a free AI-powered coding assistant that integrates with popular editors and IDEs to give you smart code completions and docs while you’re typing. It is a cool application of machine learning that can also help you code faster! Check it out here: https://www.kite.com/get-kite/?utm_medium=referral&utm_source=youtube&utm_campaign=datadaft&utm_content=description-only How to Sort a Data Frame by a Column in Pandas](https://i.ytimg.com/vi/Zs_C41bSw3o/mqdefault.jpg)