Uploaded August 2018 | Updated September 2026, 4 hours ago
Great for kids and adults, this board uses 6" thick drop-stitch material to save weight and cost.
Made from the best quality drop-stitch material with extra Powerstrip™ reinforcements, this inflatable SUP inflates to 14 - 18 psi, making them incredibly stiff for the most efficient paddling experience.
The fin system has been updated with the stiffest interface on the market, with quick and easy tool-free mounting for your easy use.
Available in 3 sizes.
----------------------------------------
STEPS:
- Remove the hand pump and connect the hose and the Halkey Roberts valve Adapter
- Unroll the board on the smooth ground like grass or sand.
- Confirm that the valve is closed, push and turn the stem at the center of the valve 45 degrees until it pops out.
-Insert the hose into the valve and twist clockwise to lock in place. put both feet on the pump and begin pumping.
- Seal the valve with the valve cap by inserting and turning clockwise
to install the fin, insert the fin tab into the fin box and slide to the side...
- Insert the fin and slide as far back as possible. align the screw with the fin tab and tight with a screwdriver
----------------------------------------
Follow us on:
WEB ‣ aquaglide.com
INSTAGRAM ‣ instagram.com/aquaglide
FACEBOOK ‣ facebook.com/Aquaglide
PINTEREST ‣ pinterest.com/Aquaglide
TWITTER ‣ twitter.com/Aquaglide
Great for kids and adults, this board uses 6" thick drop-stitch material to save weight and cost.
Made from the best quality drop-stitch material with extra Powerstrip™ reinforcements, this inflatable SUP inflates to 14 - 18 psi, making them incredibly stiff for the most efficient paddling experience.
The fin system has been updated with the stiffest interface on the market, with quick and easy tool-free mounting for your easy use.
Available in 3 sizes.
----------------------------------------
STEPS:
- Remove the hand pump and connect the hose and the Halkey Roberts valve Adapter
- Unroll the board on the smooth ground like grass or sand.
- Confirm that the valve is closed, push and turn the stem at the center of the valve 45 degrees until it pops out.
-Insert the hose into the valve and twist clockwise to lock in place. put both feet on the pump and begin pumping.
- Seal the valve with the valve cap by inserting and turning clockwise
to install the fin, insert the fin tab into the fin box and slide to the side...
- Insert the fin and slide as far back as possible. align the screw with the fin tab and tight with a screwdriver
----------------------------------------
Follow us on:
WEB ‣ aquaglide.com
INSTAGRAM ‣ instagram.com/aquaglide
FACEBOOK ‣ facebook.com/Aquaglide
PINTEREST ‣ pinterest.com/Aquaglide
TWITTER ‣ twitter.com/Aquaglide
