How to JTAG a phat Xbox 360  COMPLETE GUIDE @TheWeekendModder
How to JTAG a phat Xbox 360  COMPLETE GUIDE  @TheWeekendModder
Uploaded April 2013 | Updated November 2026, 1 hour ago
Click settings and watch in HD!!!! Click on "SHOW MORE" to see full description:

store.weekendmodder.com to buy your own!

If you would like this service done for you, contact me weekendmodder@gmail.com to set up service!!!!!

Link to known good soldering supplies on Amazon (I own and use every one of the items listed here): astore.amazon.com/weeken0a4-20


Link to album containing all images referenced in this guide: imgur.com/a/mmlIf#3

Basic text guide to follow along with the video:

1. Check your consoles dashboard version. It must be 7371 or below.
2. Check your consoles motherboard type. Xenons are done one way, non-Xenons are done a different way.
3. This set of instructions is valid for NON-XENON consoles only. That means it works on Opus/Falcon/Zephyr/Jasper boards only.
4. Solder in your connections to your JTAG header (NandX wires)
5. Test boot after soldering in the JTAG nand reading wires
6. Dump your nand (twice)
7. Confirm you have two MATCHING nand dumps - If your nand dumps are different DO NOT PROCEED.
8. Test boot after dumping your nand.
9. Build your Xell image and flash it to your console.
10. If you were to test boot at this point your console should not boot - this is because we've written Xell to the nand but not yet done the diode wiring.
11. Solder in your jumper wire
12. Solder in the first diode
13. Solder in the second diode
14. Power up your console, Xell should boot and you get your CPU key!
15. Plug the CPU key into J-runner and build your JTAG hacked image
16. Write the newly created hacked image back to the Xbox
17. Done! Now the power button or controller will now boot your hacked JTAG dashboard and booting with the Eject button will boot Xell
How to JTAG a phat Xbox 360  COMPLETE GUIDEHow to update your dashboard image on RGH.Winchester motherboard Xbox 360 - new (to me) method of identifying them.Supplies needed to RGH or JTAG Xbox 360 ConsolesWatch me RGH 1.2 a Falcon or Jasper using Matrix Glitcher V1 for instant bootsPostFix Advisory - Not all postfix adapters fit properly without some modificationRGH 4gb Corona with SD Tool and Ace V3 for under $20 total cost!2021 Overview SRGH on Trinity Xbox 360 using Matrix or CoolRunnerWeekend Modder Confesses!  (Sorry for the tease name)RGH3 Trinity Xbox 360 How To Guide.  RGH (not JTAG) with 2 wires and NO GLITCH CHIP!17489 update available   NEW STOCK COMING SOONHow to identify Corona Versions and why they dont matter
TheWeekendModder |

How to JTAG a phat Xbox 360 COMPLETE GUIDE

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER