Uploaded December 2018 | Updated November 2026, 16 hours ago
How to join a knitted-in pocket lining to the pocket front along one side edge, with no seam — Part 2 of a one-piece pocket. Part 1 is how to put stitches on hold and pick up a new fabric from behind to knit the lining. A following video joins the two layers across a row at the bottom of the pocket. When the lining is knitted, the first stitch of every wrong-side row is knitted, then the rest of the row is purled. That leaves a column of garter, or purl, bumps along the edge that will be joined — one bump for every two rows. Before starting the join, mark each bump with a removable stitch marker, through the same leg of each bump. If a bump was missed (a common slip: forgetting to knit that first stitch on a wrong-side row), the gap is easy to see, and a marker can be placed in the leg of the edge stitch at that row so the count still matches. Count the lining rows (14 in the example, so seven bumps) and work the same number of rows on the pocket front, continuing any cable or pattern down the front. On a right-side row, work to the last stitch, lift the next marked purl bump onto the left needle, and knit it together with that last stitch. Work back in pattern, and repeat at that same edge until every bump has been joined. The join is a smooth column of stitches, each one connected to a purl bump. There is a little space beside that column; on a cardigan, the button band is picked up between those two columns, and the joining column is completely taken up in the band. This is shown on the It Takes a Guild tutorial cardigan, a top-down raglan with cables, pockets, and a shawl collar.
Chapters
0:12 Introduction: joining the pocket lining at one edge (Part 2)
1:22 The planned garter bumps on the lining edge
2:58 Marking the purl bumps (including a missed one)
4:28 Matching row counts (one bump for every two rows)
5:00 Working the pocket front down to the join
6:20 Lifting the first purl bump and joining it
8:16 Joining stitch 2
8:45 Joining stitch 3
9:53 Checking the join
10:32 TIP: the joining column is taken up by the button band
Related videos
- How to Pick Up a Pocket Lining from Behind (No Seam): youtu.be/1Xfsazasx68
- How to Join a Pocket Lining Across a Row (Three-Needle): youtu.be/QBMnGXT4A-I
- How to Sew On a Vertical Patch Pocket (Mattress Stitch): youtu.be/XHDuFBTZcus
It Takes a Guild Cardigan KAL Tutorial: ravelry.com/patterns/library/it-takes-a-guild-cardigan-tutorial
It Takes a Guild Cardigan KAL playlist: youtube.com/playlist?list=PLLKJ9GuhEEwkRjQQ0-G-D-C2yuYxImcHF
More on this topic: see my playlists "Sweater Construction & Finishing: Seaming, Pockets, Steeks, Weaving in Ends" and "It Takes a Guild Cardigan KAL" on the channel.
Live Zoom classes (Bootcamps): masteryourknitting.com
If you enjoy my videos please subscribe and consider buying me a coffee on Ko-fi - ko-fi.com/suzannebryan
Where to find me -
Suzanne - Off the Cuff - youtube.com/channel/UCQBgFUvQzjz1RUm9NsgEA1A
Knitting with Suzanne Bryan on Ravelry - ravelry.com/groups/knitting-with-suzanne-bryan
Knitting with Suzanne Bryan on FB- facebook.com/groups/1769286026429876
KnittingSuzanne on Ravelry - ravelry.com/people/KnittingSuzanne
Blog: knittingsuzanne.com
#pocketlining #knittedinpocket #doublelayer #knitting #itag
How to join a knitted-in pocket lining to the pocket front along one side edge, with no seam — Part 2 of a one-piece pocket. Part 1 is how to put stitches on hold and pick up a new fabric from behind to knit the lining. A following video joins the two layers across a row at the bottom of the pocket. When the lining is knitted, the first stitch of every wrong-side row is knitted, then the rest of the row is purled. That leaves a column of garter, or purl, bumps along the edge that will be joined — one bump for every two rows. Before starting the join, mark each bump with a removable stitch marker, through the same leg of each bump. If a bump was missed (a common slip: forgetting to knit that first stitch on a wrong-side row), the gap is easy to see, and a marker can be placed in the leg of the edge stitch at that row so the count still matches. Count the lining rows (14 in the example, so seven bumps) and work the same number of rows on the pocket front, continuing any cable or pattern down the front. On a right-side row, work to the last stitch, lift the next marked purl bump onto the left needle, and knit it together with that last stitch. Work back in pattern, and repeat at that same edge until every bump has been joined. The join is a smooth column of stitches, each one connected to a purl bump. There is a little space beside that column; on a cardigan, the button band is picked up between those two columns, and the joining column is completely taken up in the band. This is shown on the It Takes a Guild tutorial cardigan, a top-down raglan with cables, pockets, and a shawl collar.
Chapters
0:12 Introduction: joining the pocket lining at one edge (Part 2)
1:22 The planned garter bumps on the lining edge
2:58 Marking the purl bumps (including a missed one)
4:28 Matching row counts (one bump for every two rows)
5:00 Working the pocket front down to the join
6:20 Lifting the first purl bump and joining it
8:16 Joining stitch 2
8:45 Joining stitch 3
9:53 Checking the join
10:32 TIP: the joining column is taken up by the button band
Related videos
- How to Pick Up a Pocket Lining from Behind (No Seam): youtu.be/1Xfsazasx68
- How to Join a Pocket Lining Across a Row (Three-Needle): youtu.be/QBMnGXT4A-I
- How to Sew On a Vertical Patch Pocket (Mattress Stitch): youtu.be/XHDuFBTZcus
It Takes a Guild Cardigan KAL Tutorial: ravelry.com/patterns/library/it-takes-a-guild-cardigan-tutorial
It Takes a Guild Cardigan KAL playlist: youtube.com/playlist?list=PLLKJ9GuhEEwkRjQQ0-G-D-C2yuYxImcHF
More on this topic: see my playlists "Sweater Construction & Finishing: Seaming, Pockets, Steeks, Weaving in Ends" and "It Takes a Guild Cardigan KAL" on the channel.
Live Zoom classes (Bootcamps): masteryourknitting.com
If you enjoy my videos please subscribe and consider buying me a coffee on Ko-fi - ko-fi.com/suzannebryan
Where to find me -
Suzanne - Off the Cuff - youtube.com/channel/UCQBgFUvQzjz1RUm9NsgEA1A
Knitting with Suzanne Bryan on Ravelry - ravelry.com/groups/knitting-with-suzanne-bryan
Knitting with Suzanne Bryan on FB- facebook.com/groups/1769286026429876
KnittingSuzanne on Ravelry - ravelry.com/people/KnittingSuzanne
Blog: knittingsuzanne.com
#pocketlining #knittedinpocket #doublelayer #knitting #itag
![ITAG Q&A 11/28/18
This is in association with the It Takes a Guild Cardigan Tutorial.
Live stream time stamps for 11-28-18
4:45—Suzanne’s sweater show & tell with ribbing/brioche options and discussion
20:51—using two color brioche ribbing on a single-color sweater
22:20—how to make copies of ribbing for “trying on” experiment
23:51—video link, ssp stitch and how to work it [https://youtu.be/O46Bsd3digE]
25:17—button band width
25:40—how to combine different yarn weights in one project
26:30—how to find all of Suzanne’s YouTube videos
27:36—knit through the back loop for twisted stitch ribbing
28:45—a good source for learning brioche knitting
29:35—how to knit the combining row for the pocket
30:31—brioche ribbing, one color and two color -
32:16—three needed bind off video [https://youtu.be/h_VSRfAUuTI]
32:25—other stitch options to work instead of ribbing
33:23—special pocket to work on a tunic style sweater & experimenting with the pocket decreases
35:12—clarification of page 40 instructions for working RS or WS rows
36:39—waist shaping increase options and working at the shaping markers
38:50—missed purl bump and 3 options for how to fix it
39:50—pocket extension
41:14—advantages of brioche ribbing and discussion of needle size to work brioche
42:52—twisted stitch ribbing
43:20—p2tog & ssp and their advantages
45:53—swatching homework for the upcoming ribbing and sleeves
49:56—Fundamentals of knitting in the round - [https://youtu.be/l8rlWN7z3aA,
“Avoiding holes at the underarm - https://youtu.be/8K-IsMdTHK0”, and “Perfect button band pick up” - https://youtu.be/AfU-6QHNlDw]
51:46—using 16” needles and compare to magic loop and two 24” needles
52:35—TKGA and Master Knitting discussion
56:59—cable flare compensation
57:59—more TKGA discussion
1:00:11—tension issues and how to solve them
Join us in this knitting adventure.
*Pattern: It Takes a Guild Cardigan KAL Tutorial by Suzanne Bryan
https://www.ravelry.com/patterns/library/it-takes-a-guild-cardigan-tutorial
Find the full list of videos for this KAL in this playlist - https://www.youtube.com/playlist?list=PLLKJ9GuhEEwkRjQQ0-G-D-C2yuYxImcHF
Where to find me -
Knitting with Suzanne Bryan on Ravelry - https://www.ravelry.com/groups/knitting-with-suzanne-bryan
Knitting with Suzanne Bryan on FB- https://www.facebook.com/groups/1769286026429876/
KnittingSuzanne on Ravelry - https://www.ravelry.com/people/KnittingSuzanne
Suzannes Blog - http://www.knittingsuzanne.com ITAG Q&A 11/28/18](https://i.ytimg.com/vi/zrDetLE0Q7Q/mqdefault.jpg)
