Uploaded December 2016 | Updated November 2026, 2 hours ago
Hello all, this is part 1 of a 3 part series, an introduction into silver pouring. All of us who pour silver have our own ways we like to do what we do, and that makes each piece unique, not only each pour, but the finished product, even if the same mold is used, will come out different from each person who pours.
In these videos I show what I do, it may not be the best way, but it is effective, and you will get good results, with practice of course.
There will be 3 videos in this series, beginning on what supplies you need, and how to get prepared to start pouring your first piece. Then there will be a pouring video. Then to finish off, a polishing and stamping video.
I hope this helps at least one person out there.
Hello all, this is part 1 of a 3 part series, an introduction into silver pouring. All of us who pour silver have our own ways we like to do what we do, and that makes each piece unique, not only each pour, but the finished product, even if the same mold is used, will come out different from each person who pours.
In these videos I show what I do, it may not be the best way, but it is effective, and you will get good results, with practice of course.
There will be 3 videos in this series, beginning on what supplies you need, and how to get prepared to start pouring your first piece. Then there will be a pouring video. Then to finish off, a polishing and stamping video.
I hope this helps at least one person out there.










