How to Install Your Home Studio or Home Studio Lite Cell Signal Booster | weBoost @weboostsignal
How to Install Your Home Studio or Home Studio Lite Cell Signal Booster | weBoost  @weboostsignal
Uploaded January 2021 | Updated November 2026, 3 hours ago
With a better value for a better cell signal, the weBoost Home Studio and Home Studio Lite improve cell signal in one large room for multiple users at one time. Learn how to install either booster kit in your home office, living room, or studio apartment.

The weBoost Home Studio is 5G ready and compatible with all major U.S. and Canadian carrier networks. Learn more at www.weboost.com.

The weBoost Home Studio Lite works exclusively for Verizon and AT&T customers in the U.S. and Rogers and Bell customers in Canada. Learn more at amazon.com/weboost.

How to Install weBoost Home Studio & Home Studio Lite
What’s in the Box
00:00-Both kits include all components needed for a complete do-it-yourself installation. You may need three additional tools: the Opensignal app to find the strongest cell signal near you, a power drill with the correct bit to drill through an exterior wall into the building, and/or RTV sealant to weatherize the hole.

Step 1
00:31-Install the Booster Antenna
First, attach the inside antenna to the booster. Make sure the antenna is pointing up for best results. Once the antenna is secured to the booster, place the booster on a counter or shelf in the room where you want better cell signal.

Step 2
00:56-Mount the Outside Directional Antenna
We recommend using an app, like Opensignal, to find the strongest cell signal near you. Point the outside antenna towards that signal. Secure the antenna to a balcony railing or vent pipe using the included mounting bracket.

Step 3
01:10-Route the Cables
Attached the provided coax cable to the outside directional antenna. Then, drill a hole in an exterior wall or run the cable through an existing hole. Once the cable is through the hole, fill in any gaps with an RTV sealant. Connect the coax cable to the booster inside. Depending on the distance covered, you may need to use both of the provided cables.

Step 4
01:49-Connect the Power Supply
Plugin the power supply line to the nearest wall outlet. Then, plug the power into the booster. If the lights are green, the booster is on and working.

For any questions, please refer to the included Installation Guide.

Like weBoost on Facebook: facebook.com/WeBoost
Follow weBoost on Twitter: twitter.com/weBoost
Follow weBoost on Instagram: instagram.com/weboost

For commercial solutions, visit wilsonpro.com/.

Subscribe to weBoost on YouTube: youtube.com/channel/UCyYDVvaOyTHFd-Fkt2toAGg
How to Install Your Home Studio or Home Studio Lite Cell Signal Booster | weBoostOff Roading in St. George UT | weBoostSome moments are meant to be felt, not rushed. ⛰️How To Install The Drive Sleek Cell Phone Signal Booster In Your Truck, Car Or SUV | weBoostWeatherproofing Cable Connections - weBoostDestination RV Cell Signal Boosters for Fifth Wheels, Toy Haulers, Trailers and RVs | weBoostHow to Install the Home Room Cell Signal Booster | weBoostweBoost | Stronger cell signal at home. Even here.Explore Wyoming: Where To Find Outdoor Adventure & Fun in Casper, WyomingDrive Sleek Install on a Jeep | weBoostTired of Buffering? Get a weBoost (6 sec) | weBoostNorth America runs on mobile. ⚡️
weBoost |

How to Install Your Home Studio or Home Studio Lite Cell Signal Booster | weBoost

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER