Uploaded August 2021 | Updated September 2026, 1 hour ago

---

shure.com/en-GB/products/microphones/mx415dual

Equipment Used:
1 - RPM640 Flange
shure.com/en-GB/products/accessories/rpm640
2 - Retaining Ring
3 - Screws (3)

Install the MX415DUAL:

Drill a 22 mm (7/8 in.) hole in the mounting surface

Use the flange as a template
to mark and drill 3 starter holes

Insert the TQG connectors through the mounting flange

Slide the retaining ring over the bottom of the microphone base until it is flush to the bottom of the flange

Press the ring firmly into place

Secure the flange to the mounting surface with screws

For additional training and information on Microflex® microphones, visit shure.com

#MX415DUAL #AudioSolutions #HowTo