How To Install C Channels / Woodworking Tips @bentswoodworking
How To Install C Channels / Woodworking Tips  @bentswoodworking
Uploaded October 2019 | Updated November 2026, 3 hours ago
This week I will walk you through the steps of how to install C Channels. This is a very simple process that can be done with minimal tools. This video will explain everything you need to know to be successful.

#cchannel #cchannels #woodworkingtips

Legacy Lumber Pre Fabricated C Channels can be found here:
legacylumber.co/collections/hardware/products/c-channel

Home Depot C Channel can be found here:
homedepot.com/p/Everbilt-2-in-x-36-in-Plain-Steel-C-Channel-Bar-with-1-8-in-Thick-801217/204225748

Rampa Tec Threaded Inserts can be found here:
rampa.com/ca/en/101-hardwood

Let me know what you think in the comments section below. If you have any questions you can also leave them below or you can head over to Instagram and follow me there and shoot me a DM. I would be happy to answer any questions that you may have about this video or anything else.

Thanks!

Jason

Find me on social media!

Instagram: @bentswoodworking
Facebook: Bent's Woodworking
Website: bentswoodworking.com

!!!PLANS NOW AVAILABLE ON MY WEBSITE!!!

Affiliate links to the tools used in this video below:
DISCLAIMER – As an Amazon Associate I earn from qualifying purchases.

Festool Track Saw Rail
amzn.to/2L6Wi6G
Festool Eye Protection
amzn.to/2Zu5q9i
Festool OF 1400
amzn.to/2UgLGF8
Festool CT 36
amzn.to/2UjrNxk
Festool Boom Arm Assembly
amzn.to/2zxR1hP
Festool PDC Drill
amzn.to/2ZAFY1Z
WL Fuller Brad Point Bit Set
amzn.to/2ZEVdag
Whitesides 1/4" Spiral Bit
amzn.to/30ZGGX2
Amana 3/4" Straight Bit
amzn.to/35lMfCz
Woodpeckers Paolini 6" Ruler
amzn.to/2OvSjmc

Camera and Audio Equipment I Use

Panasonic Lumix G85
amzn.to/2Y8X9el
Canon T7i DSLR
amzn.to/2Sx0lvb
Rode Wireless Filmmakers Kit
amzn.to/2Sl4yBZ
Rode Wireless Go
amzn.to/32yBzz4
Manfroto Video Tripod
amzn.to/2Yc37ej
Vanguard Alta Pro 2 + Tripod
amzn.to/2Y5pB0H
How To Install C Channels / Woodworking TipsFestool LR 32 - IntroHow To Make A Box Joint JigPerfectly Fit Your Boards with Easy Drawer Slide Installation!Hammer A3-26 Jointer/Planer ComboMortise and tenon with the Shaper OriginBents Woodworking LIVE - 16 Oct 2021Something everyone should seeI Built a Wall in my GarageI sold my bandsaw for this - Hammer N4400 AssemblyI’ve been using the wrong table saw for yearsFirst Impressions with the Graco Ultimate Quickshot II
Bents Woodworking |

How To Install C Channels / Woodworking Tips

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER