How to install and configure FTP on IIS 8 in Windows Server 2012  | How to setup FTP server 2012 R2 @WhatsHow
How to install and configure FTP on IIS 8 in Windows Server 2012  | How to setup FTP server 2012 R2  @WhatsHow
Uploaded March 2020 | Updated November 2026, 4 hours ago
#Configureftp #iis #FTP #Microsoft #Server #Windows2012 #R2

Hello Friends,

Will teach you how to set up an FTP server in Windows 2012, I am also going to show you how to access through LAN & WAN.
Requirements

-A Windows 2012 R2 server.
-An administrative account.

1- Enable Web Server (IIS) role and FTP Server role service.

-Log in using an administrative account
-Open Server Manager
-Go to Manage - Add Roles and Features
-Click Next
-Select Role-based or feature-based installation
-Click Next
-Select your server
-Click Next.
- Scroll down and put a checkmark in Web Server (IIS)
-Add features window pops up. Put a checkmark in the Include management tools (if applicable) option
-Click Add Features button
-Click Next
-Click Next
-Click Next
-Scroll down and put a checkmark in FTP server,
-Select FTP Service and FTP Extensibility.
-Click Next
-Click Install
- installation is finished, click Close

2- Create FTP users.

-Create users in Windows in order to be able to use FTP services.
- You can use either local or domain users.
- I am creating some local users.
- If you are using domain users is, when you log in to FTP, you must use the domain/account format.

- In Server Manager go to Tools
-Click Computer Management
-Click Local Users and Groups
-Click Users
- right-click a blank area and then select New User

3- Configuring FTP global IIS settings.

It is very easy, follow the steps below:

- In Server Manager - go to Tools
Click Internet Information Services (IIS) Manager.
- double-click the server icon (in the tree below the option Start Page)

- Select Do not show this message and click the No button
- double-click the FTP Authentication icon
-right-click Anonymous Authentication and set it to Enable.
-C lick Basic Authentication - set it to Enable.
- double-click the server icon.
- Double click the FTP Authorization Rules option
-Delete all rules in the centre pane.
-After all, rules have been deleted, right-click a blank area in the centre pane and select the option Add Allow Rule…
-Click the option Specified users.

-Check either the boxes Read or Write depending the access you want to grant.
-Click the OK button

4- Creating an FTP site.

- Open Windows Explorer
- Navigate to C:\inetpub\ftproot (default local folder )

-Create your own folder at this point if it is desired.
-Open Server Manager
-Go to Tools
-Click on Internet Information Services (IIS) Manager
-In the left pane - right-click the server icon (in the tree below the option Start Page)
-lick Add FTP Site
- In FTP site name type a friendly name for your site. (My FTP Site for example)
- Physical path browse to the folder you creates Click Next
- Select the server’s IP address you want to assign to the site
-Port remains as 21 by default.
- Ensure the option Start FTP site automatically is checked
- Select the No SSL option if you are nor required to use certificates. select one of the other options.
-Click Next
- In the Authentication section, put a checkmark in Anonymous If you want to allow anonymous users.
- Select Basic to allow access to users created in Part Two.
- in the Allow access to drop-down menu, select: Specified Users
- Check the box Write to grant write access to users.
Click Finish

5- IIS Firewall setup.

- In Server Manager
- go to Tools
- Click Internet Information Services (IIS) Manager.
- double-click the server icon (in the tree below the option Start Page)
-In the centre pane, double-click the FTP Firewall Support icon
- In the Data Channel Port Range box, make sure the value is 0-0 to use the default port range.

-Click Apply
-Close Internet Information Services (IIS) Manager

6- Windows Firewall setup.

-By default, all exceptions needed for FTP are added to the Windows Firewall at the time you enable the FTP Server role.

-Open Server Manager

-Click Local Server
- In the right pane, click the hyperlink beside the Windows Firewall option. It should say Public: On (or Off).

-The Windows firewall window opens. In the left pane click Advanced Settings
- In Advanced Security window opens. In the left pane click Inbound Rules.
- In the right pane, verify there’s a rule called FTP Server (FTP Traffic-In)
-Double click this rule
-In the General tab, verify the option Enabled is checked.
-Go to the Protocols and Ports tab.
-Verify the Protocol type is TCP and the Local port value is 21.
-Go to the Advanced tab
-Make sure firewall profile: Domain, Private and Public are checked.
-Click OK button

- FTP Server Passive (FTP Passive Traffic-In) rule. Except that the local port value in this rule should be1024-65535

-FTP Server Secure (FTP SSL Traffic-In) rule. Except that the local port value in this rule should be 990

In the left pane, click Outbound Rules

- FTP Server (FTP Traffic-Out) rule. Except that the local port value in this rule should be 20
- FTP Server Secure (FTP SSL Traffic-Out) rule. Except that the local port value in this rule should be 989
How to install and configure FTP on IIS 8 in Windows Server 2012  | How to setup FTP server 2012 R2How to split one column into multiple columns in Excel | How to Split Cells in excel #ExcelHow to Add online video in PowerPoint | PowerPoint: Inserting VideosHow to Install VirtualBox 5.1.10  on Windows 10 | How to install Windows 10 VertualBoxPrimary (Internal) Battery (601) | Error 601 internal battery 601 may need replacementWhats How Live StreamHow to Repair or Troubleshoot Windows 10 | Windows 10 TroubleshooterAutoCAD 2020 Complete Tutorial for Beginners Part 5 | AutoCAD - 2020 Complete Tutorial for BeginnersHow to Install Picture Manager 2013  2016  Microsoft Office Picture ManagerDownload and install Original Office Professional 2021 for free  Step by Step GuideHow to Boot into Safe Mode On Windows 10Fix: USB pen drive not showing data error | Show Hidden Files on USB Drive and Memory Card
Whats How |

How to install and configure FTP on IIS 8 in Windows Server 2012 | How to setup FTP server 2012 R2

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER