JK Feather Ranch | How to Install a "non-DIY" Mini Split @jkfeatherranch | Uploaded July 2021 | Updated October 2024, 1 hour ago.
In this video, I will show you how to install a Mr. Cool Advantage mini-split on my garage. They make a DIY unit, but with a few extra steps and tools, you can install this one for a lot less money.
Here are the items used in this video:*
Mini-Split: amzn.to/455PNH8
Wall Bracket: amzn.to/3OwW7lx
Vacuum Pump: amzn.to/3DvGvIX
Pump Oil: amzn.to/3KhhuVG
Gauge Set: amzn.to/453u4jf
Mini-Split Adapter: amzn.to/3DyNOQ2
Flaring Tool: amzn.to/3rKmThw
Micron Gauge: amzn.to/3YcRqk3
Nylog Blue (Sealant): amzn.to/3Oxcb6X
I do not recommend purchasing the line set cover from Amazon like I did, as it is ridiculously overpriced. Instead, buy a section of 4x3 square metal downspout from Home Depot and cut it to the length you need. You can make an end cap out of some sheet metal, a hammer, and a vise.
*These are Amazon affiliate links. By using them to buy products, we will earn a small commission. You will support the channel, but will not pay anything extra (:
In this video, I will show you how to install a Mr. Cool Advantage mini-split on my garage. They make a DIY unit, but with a few extra steps and tools, you can install this one for a lot less money.
Here are the items used in this video:*
Mini-Split: amzn.to/455PNH8
Wall Bracket: amzn.to/3OwW7lx
Vacuum Pump: amzn.to/3DvGvIX
Pump Oil: amzn.to/3KhhuVG
Gauge Set: amzn.to/453u4jf
Mini-Split Adapter: amzn.to/3DyNOQ2
Flaring Tool: amzn.to/3rKmThw
Micron Gauge: amzn.to/3YcRqk3
Nylog Blue (Sealant): amzn.to/3Oxcb6X
I do not recommend purchasing the line set cover from Amazon like I did, as it is ridiculously overpriced. Instead, buy a section of 4x3 square metal downspout from Home Depot and cut it to the length you need. You can make an end cap out of some sheet metal, a hammer, and a vise.
*These are Amazon affiliate links. By using them to buy products, we will earn a small commission. You will support the channel, but will not pay anything extra (: