Uploaded March 2020 | Updated November 2026, 3 hours ago
Due to the nature of the different orientations and the ways that a user might prefer for connecting extension cables to their GPUs, the RGB strips combined with the top braided cables and the bottom braided cables of STRIMER PLUS 8-PIN are evenly long hence users can decide which orientation they want to go with.
Here comes the question: while bending STRIMER PLUS 8-PIN, the bottom cables tend to squeeze altogether since it has the same length as the top cables. So, how to make the bottom cables bend as evenly as the top cables and tuck away the excessive parts?
Step 1
Unpin the bottom braided cables from the 4 plastic holders.
Step 2
Bend the top LED strips to the curve you want.
Step 3
Tighten the braided cables and clip them back to the 4 plastic holders. Don’t rush. One cable at a time. (After all, it has only 8 braided cables.)
Step 4
The redundant length of the bottom cable will be left at the end of the inner side and thus won’t be seen from the outside.
Add an extra layer of stylish and unique flair to your build now ►
Newegg:
24-PIN bit.ly/24pinUS
8-PIN bit.ly/8pinUS
OCUK: bit.ly/STRIMERplus
Caseking: bit.ly/strimerplus
Due to the nature of the different orientations and the ways that a user might prefer for connecting extension cables to their GPUs, the RGB strips combined with the top braided cables and the bottom braided cables of STRIMER PLUS 8-PIN are evenly long hence users can decide which orientation they want to go with.
Here comes the question: while bending STRIMER PLUS 8-PIN, the bottom cables tend to squeeze altogether since it has the same length as the top cables. So, how to make the bottom cables bend as evenly as the top cables and tuck away the excessive parts?
Step 1
Unpin the bottom braided cables from the 4 plastic holders.
Step 2
Bend the top LED strips to the curve you want.
Step 3
Tighten the braided cables and clip them back to the 4 plastic holders. Don’t rush. One cable at a time. (After all, it has only 8 braided cables.)
Step 4
The redundant length of the bottom cable will be left at the end of the inner side and thus won’t be seen from the outside.
Add an extra layer of stylish and unique flair to your build now ►
Newegg:
24-PIN bit.ly/24pinUS
8-PIN bit.ly/8pinUS
OCUK: bit.ly/STRIMERplus
Caseking: bit.ly/strimerplus
![[Tutorial] ODYSSEY X - How to assemble to Dynamic- R (rotate) mode
Odyssey X: One Distinct Case, Two Distinct Looks
This is a video tutorial on assembling ODYSSEY X to Dynamic - R (rotate) mode.
ODYSSEY X is a high-quality aluminum chassis that established a unique look for performance-oriented enthusiasts with an open airflow design and spacious main chamber for large components.
Shop now ►
NEWEGG
Black: https://www.newegg.com/p/2AM-000Z-00076
Silver: https://www.newegg.com/p/2AM-000Z-00075
CASEKING
https://www.caseking.de/odyssey-x
OCUK
https://overclockers.co.uk/odysseyx
More info:
https://lian-li.com/product/odyssey-x/ [Tutorial] ODYSSEY X - How to assemble to Dynamic- R (rotate) mode](https://i.ytimg.com/vi/JtZPasqLUXs/mqdefault.jpg)









