NYC CNC | How to Get Started with a @tormachinc and @adskFusion! Beginners Guide! @nyccnc | Uploaded October 2022 | Updated October 2024, 10 hours ago.
If you just got a Tormach and are anxious to get your first part made: you're in the right place! This video goes step-by-step through creating the Fusion 360 CAM Setup, the first CAM operation, setting up the tool, simulating the G-Code, posting the code, loading it into PathPilot, setting up the WCS on the Tormach machine, and hitting cycle start! We also mention good safety tips and point out the most obvious areas we see folks make mistakes or crash.
00:00 Intro
00:25 - Create a new setup
02:15 - Create Contour Toolpath
03:26 - Simulate Toolpath
04:11 - Create NC Program
05:18 - Load File into Pathpilot
05:41 - Tool Setup and Measure Offsets
09:00 - Input Offsets into Pathpilot
10:15 - Jogging the Machine
11:03 - Zeroing Stock
13:42 - Feedhold and ending a Program
14:02 - Avoiding a crash
14:40 - Machining the Contour
5 Reasons to Use a Fixture Plate on Your CNC Machine: bit.ly/3sNA4uH
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Links for this video
Hands on CNC Training Classes: saundersmachineworks.com/collections/events/products/hands-on-cnc-machining-class
Online Fusion 360 Training: bit.ly/LearnFusion360
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reach us / CNC Info:
Speeds & Feeds: provencut.com
Fusion 360 (Purchase, Support, Training): http://dsi.fyi/3yu7Mt0
SMW Products: saundersmachineworks.com
CNC Resources: nyccnc.com
If you just got a Tormach and are anxious to get your first part made: you're in the right place! This video goes step-by-step through creating the Fusion 360 CAM Setup, the first CAM operation, setting up the tool, simulating the G-Code, posting the code, loading it into PathPilot, setting up the WCS on the Tormach machine, and hitting cycle start! We also mention good safety tips and point out the most obvious areas we see folks make mistakes or crash.
00:00 Intro
00:25 - Create a new setup
02:15 - Create Contour Toolpath
03:26 - Simulate Toolpath
04:11 - Create NC Program
05:18 - Load File into Pathpilot
05:41 - Tool Setup and Measure Offsets
09:00 - Input Offsets into Pathpilot
10:15 - Jogging the Machine
11:03 - Zeroing Stock
13:42 - Feedhold and ending a Program
14:02 - Avoiding a crash
14:40 - Machining the Contour
5 Reasons to Use a Fixture Plate on Your CNC Machine: bit.ly/3sNA4uH
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Links for this video
Hands on CNC Training Classes: saundersmachineworks.com/collections/events/products/hands-on-cnc-machining-class
Online Fusion 360 Training: bit.ly/LearnFusion360
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reach us / CNC Info:
Speeds & Feeds: provencut.com
Fusion 360 (Purchase, Support, Training): http://dsi.fyi/3yu7Mt0
SMW Products: saundersmachineworks.com
CNC Resources: nyccnc.com