Uploaded February 2015 | Updated November 2026, 2 days ago
fluidmaster.com/toilet-problems/toilet-running-constantly
If your fill valve runs continuously or you hear a constant hissing sound or water hammer you may have debris trapped in the valve. It is possible for dirt and debris to lodge itself inside the valve. This can happen any time the water is on and may happen after a new installation, a few days later or even months and years after installation.
Follow these steps to clean the valve:
1. Turn off water and flush the toilet.
2. Reach into the tank with your right hand and lift up the float cup and grip the gray shaft and hold it in that position.
3. With your left hand grab the cap and at the same time place your thumb on the side of the plastic arm.
4. Twist both the cap and plastic arm counterclockwise 1/8th turn. 5. Press down on the cap while making a quick twisting motion.
6. Lift up on cap and move away from top of valve body. Using a cup hold the cup upside down over the exposed opening of the valve and turn on the water supply full force for 10-15 seconds. Look inside valve to ensure no debris is left inside the valve.
7. Reverse steps to place top back on the valve. Turn on water and flush toilet to ensure problem has been resolved.
To watch a video on how to install the Fluidmaster 400A toilet fill valve, please click here:youtube.com/watch?v=cbTEq_da4H8
** DO NOT USE IN-TANK DROP-IN TOILET BOWL CLEANERS CONTAINING BLEACH OR CHLORINE. USE OF SUCH PRODUCTS WILL RESULT IN DAMAGE TO TANK COMPONENTS AND MAY CAUSE FLOODING AND PROPERTY DAMAGE. USE OF SUCH PRODUCTS WILL VOID THIS WARRANTY. Instead, we recommend using Flush ‘n Sparkle® automatic toilet bowl cleaner. It is safe for toilet parts and does not void the warranty for Fluidmaster products. Click here to learn more about Flush 'n Sparkle:
https://fluidmaster.com/shop/product/...
fluidmaster.com/toilet-problems/toilet-running-constantly
If your fill valve runs continuously or you hear a constant hissing sound or water hammer you may have debris trapped in the valve. It is possible for dirt and debris to lodge itself inside the valve. This can happen any time the water is on and may happen after a new installation, a few days later or even months and years after installation.
Follow these steps to clean the valve:
1. Turn off water and flush the toilet.
2. Reach into the tank with your right hand and lift up the float cup and grip the gray shaft and hold it in that position.
3. With your left hand grab the cap and at the same time place your thumb on the side of the plastic arm.
4. Twist both the cap and plastic arm counterclockwise 1/8th turn. 5. Press down on the cap while making a quick twisting motion.
6. Lift up on cap and move away from top of valve body. Using a cup hold the cup upside down over the exposed opening of the valve and turn on the water supply full force for 10-15 seconds. Look inside valve to ensure no debris is left inside the valve.
7. Reverse steps to place top back on the valve. Turn on water and flush toilet to ensure problem has been resolved.
To watch a video on how to install the Fluidmaster 400A toilet fill valve, please click here:youtube.com/watch?v=cbTEq_da4H8
** DO NOT USE IN-TANK DROP-IN TOILET BOWL CLEANERS CONTAINING BLEACH OR CHLORINE. USE OF SUCH PRODUCTS WILL RESULT IN DAMAGE TO TANK COMPONENTS AND MAY CAUSE FLOODING AND PROPERTY DAMAGE. USE OF SUCH PRODUCTS WILL VOID THIS WARRANTY. Instead, we recommend using Flush ‘n Sparkle® automatic toilet bowl cleaner. It is safe for toilet parts and does not void the warranty for Fluidmaster products. Click here to learn more about Flush 'n Sparkle:
https://fluidmaster.com/shop/product/...










