How to Fix Noisy Clacking Keys on a Nord Electro 2 (Fatar Keybed Teardown) @antonycartwright
How to Fix Noisy Clacking Keys on a Nord Electro 2 (Fatar Keybed Teardown)  @antonycartwright
Uploaded November 2026 | Updated November 2026, 3 hours ago
If your Nord Electro 2 has developed a loud plastic clacking noise when playing or releasing keys, the culprit is usually hardened or worn rubber dampers and dried-out pivot grease inside the Fatar TP/8O waterfall keybed.

In this video, I tear down my Nord Electro 2, show the exact cause of the clacking noise up close, clean and silicone-grease the keybed mechanisms, and walk through the full rebuild step by step—including the trickiest part: removing and reinstalling the keys and return springs without damaging anything.

🔧 What’s Covered in This Video:
• Identifying the root cause: degraded rubber dampers & dry plastic-on-plastic contact
• Removing individual waterfall keys from the Fatar TP/8O chassis
• Safe removal and re-insertion of the key return springs
• Applying pure silicone grease to key pivots and rubber dampers
• Full keybed reassembly and before/after sound comparison

🛠️ Tools & Materials Used:
• Pure Silicone Grease (plastic/rubber-safe — avoid petroleum or lithium grease)
• Small philips screwdriver

#NordElectro2 #KeyboardRepair #FatarTP8O #SynthRepair #NordKeyboard #DIYRepair #WaterfallKeybed
How to Fix Noisy Clacking Keys on a Nord Electro 2 (Fatar Keybed Teardown)EXPERIMENT #2 - Powering An LED - With Variable Resistor - Simple - Step by Step - Ohms Law - Part 2EXPERIMENT #2 - Powering An LED - With Variable Resistor - Simple - Step by Step - Ohms Law - Part 1Live Stream: I now have 5000 subscribers!Post Is Here! (Random, Cheap Ebay Stuff) #29 (Some Bargains!)INVESTIGATING: My New DS0138 2.4 Broken Scope! Oooooooooo! :-( :-(TUTORIAL: How to Design Your Own Custom PCBs For Copper Clad Boards - DesignSpark PCB - Part 2TUTORIAL: How to Setup & Code A Relay - Arduino, ESP32 & ESP8266 (Part 1) Quick + Simple!More Waffle About the Light Project!TUTORIAL: How to Adjust Output Voltage Switch Mode Power Supply! 5v to 4.2v - Lithium! Part 1/2MQTT - What is it and how does it work? Simple, Quick & Easy. PART 1/2TUTORIAL: How to Adjust Output Voltage Switch Mode Power Supply! 5v to 4.2v - Lithium! Part 2/2
Antony Cartwright (Electronics & Code) |

How to Fix Noisy Clacking Keys on a Nord Electro 2 (Fatar Keybed Teardown)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER