Uploaded April 2026 | Updated November 2026, 31 minutes ago
Here are some troubleshooting tips if you GoPro doesn’t want to turn on.
First, keep the power/ mode button pressed for at least 10 seconds.
If that doesn’t work, plug it in, but make sure to plug it into a wall, not a laptop, or another device, so that the Go Pro gets enough power.
Open the charging compartment and connect it. A light should appear, now hold the power/mode button and it should turn on. Now look for the battery icon. Press the shutter and see if the battery icon appears. Maybe the Go Pro had an empty battery and now it’s charging. If you don’t see a battery icon, then your battery pack might be the fault. Or that it’s not pushed all the way into the battery slot.
The GoPro can run only on the power outlet. As you can see, without a battery it is running and not showing me the battery icon, but as soon as I insert the battery pack, I get the battery icon. So if you don’t have the icon, in spite the battery being inserted, that means you should get a new battery.
If it still doesn’t work, then take out the SD card. Sometimes a corrupt SD card can render the Go Pro to not turn on.
If the Go Pro works after you took out the SD card, then connect the card into your computer via an adapter, back up all your files, just copy them somewhere to not lose them. Then right click and format the card. This will erase everything on the card.
If you’re using MacOS, go to disk utility, select the SD Card and press erase.
Now insert the empty SD card back and see if it works.
If even this hasn’t worked, what you can also do is clean the contacts. Spray some contact cleaner on the contacts. As a warning, I’m using WD40 Contact cleaner!!! It is a special formular for contacts. Don’t spray regular WD40.
Ok. First, spray some contact cleaner on the SD Card contacts and see if it works. If it doesn’t spray some on the charging port. But don’t spray like this, instead, spray gently on the port. Let it dry and try again. And I mean it. Let if dry. Because if you connect the power while wet, you can fry your charging port.
I hope this video helped!
Patreon Page: patreon.com/LLEnglishChannel
Merch: teespring.com/stores/ll-squad-store
Join this channel to get access to perks:
youtube.com/channel/UCXtyKQlii_PcsodqfgY_dfA/join
Twitch: twitch.tv/laur2321
discord link: discord.gg/JURhgpP
My Instagram: instagram.com/laurentiu_lucaci
#LLEnglishChannel #review #Gopro #techtips
Here are some troubleshooting tips if you GoPro doesn’t want to turn on.
First, keep the power/ mode button pressed for at least 10 seconds.
If that doesn’t work, plug it in, but make sure to plug it into a wall, not a laptop, or another device, so that the Go Pro gets enough power.
Open the charging compartment and connect it. A light should appear, now hold the power/mode button and it should turn on. Now look for the battery icon. Press the shutter and see if the battery icon appears. Maybe the Go Pro had an empty battery and now it’s charging. If you don’t see a battery icon, then your battery pack might be the fault. Or that it’s not pushed all the way into the battery slot.
The GoPro can run only on the power outlet. As you can see, without a battery it is running and not showing me the battery icon, but as soon as I insert the battery pack, I get the battery icon. So if you don’t have the icon, in spite the battery being inserted, that means you should get a new battery.
If it still doesn’t work, then take out the SD card. Sometimes a corrupt SD card can render the Go Pro to not turn on.
If the Go Pro works after you took out the SD card, then connect the card into your computer via an adapter, back up all your files, just copy them somewhere to not lose them. Then right click and format the card. This will erase everything on the card.
If you’re using MacOS, go to disk utility, select the SD Card and press erase.
Now insert the empty SD card back and see if it works.
If even this hasn’t worked, what you can also do is clean the contacts. Spray some contact cleaner on the contacts. As a warning, I’m using WD40 Contact cleaner!!! It is a special formular for contacts. Don’t spray regular WD40.
Ok. First, spray some contact cleaner on the SD Card contacts and see if it works. If it doesn’t spray some on the charging port. But don’t spray like this, instead, spray gently on the port. Let it dry and try again. And I mean it. Let if dry. Because if you connect the power while wet, you can fry your charging port.
I hope this video helped!
Patreon Page: patreon.com/LLEnglishChannel
Merch: teespring.com/stores/ll-squad-store
Join this channel to get access to perks:
youtube.com/channel/UCXtyKQlii_PcsodqfgY_dfA/join
Twitch: twitch.tv/laur2321
discord link: discord.gg/JURhgpP
My Instagram: instagram.com/laurentiu_lucaci
#LLEnglishChannel #review #Gopro #techtips










