Uploaded February 2019 | Updated November 2026, 3 hours ago
How to replace the Track Bar. In most cases, the bushings are worn out on the track bar. This is can be the cause of death wobble. Torque spec for track bar bolts 85-foot pounds.
Amazon Affiliate
For Track Bar Replacement
MOOG RK660669 Track Bar amzn.to/2Gobzhe
Detroit Axle 4pc Complete Inner Outer Tie Rod End Link Kit amzn.to/2BfHhNb
Jeep Grand Cherokee 99-04 Double Din Radio Bezel Installation Dash Kit amzn.to/2UIPi6i
Jeep Grand Cherokee WJ 2002-2004 Double Din Radio Stereo Bezel amzn.to/2Dk7hVJ
OE Wheels 20 Inch Style Gloss Black 20x9 Rim amzn.to/2EV6Fan
Some of these links go to websites and some are affiliate links (including Amazon) where I'll earn a small commission if you make a purchase at no additional cost to you. This helps me to continue to make videos like this. Thank you for your support!
Donate to Help Support Channel paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=Q7WCDR84D2VDC&source=url
Facebook facebook.com/Martinbuilt-2351766611763181
Disclaimer:
FYI if you click any of the product links above and end up purchasing anything I MAY get paid a small commission at no extra charge. This is one of the ways you can support the channel. Your support helps me bring out more content for all of you. Martinbuilt assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not Martinbuilt. Martinbuilt cannot guarantee against improper use or unauthorized modifications of this information.
How to replace the Track Bar. In most cases, the bushings are worn out on the track bar. This is can be the cause of death wobble. Torque spec for track bar bolts 85-foot pounds.
Amazon Affiliate
For Track Bar Replacement
MOOG RK660669 Track Bar amzn.to/2Gobzhe
Detroit Axle 4pc Complete Inner Outer Tie Rod End Link Kit amzn.to/2BfHhNb
Jeep Grand Cherokee 99-04 Double Din Radio Bezel Installation Dash Kit amzn.to/2UIPi6i
Jeep Grand Cherokee WJ 2002-2004 Double Din Radio Stereo Bezel amzn.to/2Dk7hVJ
OE Wheels 20 Inch Style Gloss Black 20x9 Rim amzn.to/2EV6Fan
Some of these links go to websites and some are affiliate links (including Amazon) where I'll earn a small commission if you make a purchase at no additional cost to you. This helps me to continue to make videos like this. Thank you for your support!
Donate to Help Support Channel paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=Q7WCDR84D2VDC&source=url
Facebook facebook.com/Martinbuilt-2351766611763181
Disclaimer:
FYI if you click any of the product links above and end up purchasing anything I MAY get paid a small commission at no extra charge. This is one of the ways you can support the channel. Your support helps me bring out more content for all of you. Martinbuilt assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not Martinbuilt. Martinbuilt cannot guarantee against improper use or unauthorized modifications of this information.





![How to Install a Mustang Hood Scoop on a 99-04 Jeep Grand Cherokee
With some modifications to the hood scoop grill, this scoop fits like it was made for the Jeep Grand Cherokee WJ. This is the MMD 71323-00 hood scoop that I purchased from https://www.americanmuscle.com made to fit the 05-09 Ford Mustangs.
I built a Ram Air cold air intake and this hood scoop that works perfectly after I cut the hole through the hood.
Related Videos
Ram Air Intake for 99-04 Jeep Grand Cherokee 4.7 https://youtu.be/45YNy7LvIHU
Modifying martinbuilt Ram Air to fit 2008 Intake Manifold w/ 75mm Throttle Body
https://youtu.be/sY8pegOFJMQ
Amazon Affiliate
DNA MOTORING Hood Scoop [for 05-09 Ford Mustang] https://amzn.to/3n88mHg
DEWALT 20V Max Cordless Drill / Driver Kit, Compact, 1/2-Inch https://amzn.to/3qYs3lX
Titanium Step Drill Bit Set https://amzn.to/3I1EAfx
Dremel 4000 Rotary Tool Kit w/Flex Shaft https://amzn.to/3na81np
Dremel Flex Shaft Rotary Tool Attachment, 36” Long Cable https://amzn.to/34qXLAB
Donate to Help Support Channel https://www.paypal.com/cgi-bin/webscr?cmd s-xclick&hosted_button_id=Q7WCDR84D2VDC&source=url
Facebook https://www.facebook.com/Martinbuilt-2351766611763181
Disclaimer:
FYI if you click any of the product links above and end up purchasing anything I MAY get paid a small commission at no extra charge to you. This is one of the ways you can support the channel. Your support helps me bring out more content for all of you. Martinbuilt assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not Martinbuilt. Martinbuilt can not guarantee against improper use or unauthorized modifications of this information.
#jeepgrandcherokee #martinbuilt How to Install a Mustang Hood Scoop on a 99-04 Jeep Grand Cherokee](https://i.ytimg.com/vi/NPPUzpU-6b8/mqdefault.jpg)




