Uploaded June 2023 | Updated September 2026, 3 weeks ago
🔗 MrD-RC.com 🔗 patreon.com/MrD_RC
A few people have contacted me, having problems configuring Archer Plus stabilised receivers, such as the SR10+. The SXR Tool no longer works for these receivers, and changes revert back to their old stated. The solution is to install new SRX LUA script tools These add new calibration and setup tools for the Archer Plus stabilised receivers. These new tools will be included as part of ETHOS 1.5. But, until then. We need to install them ourselves.
In this video, we have a quick overview of making sure everything is up to date. For full videos on updating, please see the links below. After that, we download and install the LUA script tools. Next, we have a quick look at the tool. If you have used the old SxR Tool. The new SR tool is very familiar. Only some of the names have changed to make things clearer.
✈️ Contents ✈️
00:00 Introduction
00:35 Make sure the transmitter operating system firmware (ETHOS) is up to date
03:15 Updating the RF or receiver firmware
03:47 Where can you find the versions of the RF and receiver firmware installed?
04:08 Downloading the firmware to the transmitter
04:55 Downloading the RF module from the FrSKY site
05:08 Downloading the receiver firmware from the FrSKY site
07:03 Updating the internal RF module firmware
08:19 Updating the receiver firmware
10:49 Downloading and installing the SRX LUA script
13:12 Where is the new SRX setup tools?
13:43 Checking out the new SRX configuration tool
17:18 Conclusion
Thank you for watching this video. Time is precious, so I hope that you got some benefit from this video. If you have any questions, please leave a comment and I'll do my best to answer. Please try to keep questions relevant to the video in, as they may also help others who have the same question.
✈️ In this video ✈️
🔗 Updating ETHOS: youtube.com/watch?v=fvxbYacd-bk&t=382s
🔗 Updating the transmitter's RF module: youtu.be/3DmDUWopO-0
🔗 Updating receiver firmware: youtu.be/9tncdNDinFM
⚙️ FrSKY TANDEM X20S transmitter: bit.ly/MrD_3x6n6JL
⚙️ FrSKY Archer Plus SR10+ receiver: bit.ly/MrD_FrSkySR10Plus
✈️ Help other RC pilots find this video ✈️
If you found the video useful, I'd appreciate a thumbs up. This will help YouTube share this video with other RC pilots who may find it helpful. If you would like to get more videos when they become available, please subscribe and click the notifications bell icon. If there are links above, they may be affiliate links. If you click them, it will help me and my channel at no additional cost to you.
✈️ Supporting me and other resources ✈️
🛩 There are more tutorials on my web site at https://www.MrD-RC.com.
🛩 You can also join like-minded people at the Fixed Wing RC Rebels group and INAV Fixed Wing Group on Facebook.
🛩 Join the channel's discord server at discord.gg/HMvrgZX6su
🛩 Liking the video, subscribing, and clicking the bell icon can help greatly. This shows YouTube that the video is helpful, so it will be shown to more people, who may have the problem dealt with here.
🛩 If you found my video useful, you can become a Patreon at patreon.com/MrD_RC
🛩 If you prefer, you could always buy me a Coffee at mrd-rc.com/go/ko-fi
🛩 I also have merch at mrd-rc.creator-spring.com This include branded items as well as general fixed wing RC apparel.
Thank you for your time, and don't forget to fly it like you stole it!
#FrSKY #SR10 #LUA
🔗 MrD-RC.com 🔗 patreon.com/MrD_RC
A few people have contacted me, having problems configuring Archer Plus stabilised receivers, such as the SR10+. The SXR Tool no longer works for these receivers, and changes revert back to their old stated. The solution is to install new SRX LUA script tools These add new calibration and setup tools for the Archer Plus stabilised receivers. These new tools will be included as part of ETHOS 1.5. But, until then. We need to install them ourselves.
In this video, we have a quick overview of making sure everything is up to date. For full videos on updating, please see the links below. After that, we download and install the LUA script tools. Next, we have a quick look at the tool. If you have used the old SxR Tool. The new SR tool is very familiar. Only some of the names have changed to make things clearer.
✈️ Contents ✈️
00:00 Introduction
00:35 Make sure the transmitter operating system firmware (ETHOS) is up to date
03:15 Updating the RF or receiver firmware
03:47 Where can you find the versions of the RF and receiver firmware installed?
04:08 Downloading the firmware to the transmitter
04:55 Downloading the RF module from the FrSKY site
05:08 Downloading the receiver firmware from the FrSKY site
07:03 Updating the internal RF module firmware
08:19 Updating the receiver firmware
10:49 Downloading and installing the SRX LUA script
13:12 Where is the new SRX setup tools?
13:43 Checking out the new SRX configuration tool
17:18 Conclusion
Thank you for watching this video. Time is precious, so I hope that you got some benefit from this video. If you have any questions, please leave a comment and I'll do my best to answer. Please try to keep questions relevant to the video in, as they may also help others who have the same question.
✈️ In this video ✈️
🔗 Updating ETHOS: youtube.com/watch?v=fvxbYacd-bk&t=382s
🔗 Updating the transmitter's RF module: youtu.be/3DmDUWopO-0
🔗 Updating receiver firmware: youtu.be/9tncdNDinFM
⚙️ FrSKY TANDEM X20S transmitter: bit.ly/MrD_3x6n6JL
⚙️ FrSKY Archer Plus SR10+ receiver: bit.ly/MrD_FrSkySR10Plus
✈️ Help other RC pilots find this video ✈️
If you found the video useful, I'd appreciate a thumbs up. This will help YouTube share this video with other RC pilots who may find it helpful. If you would like to get more videos when they become available, please subscribe and click the notifications bell icon. If there are links above, they may be affiliate links. If you click them, it will help me and my channel at no additional cost to you.
✈️ Supporting me and other resources ✈️
🛩 There are more tutorials on my web site at https://www.MrD-RC.com.
🛩 You can also join like-minded people at the Fixed Wing RC Rebels group and INAV Fixed Wing Group on Facebook.
🛩 Join the channel's discord server at discord.gg/HMvrgZX6su
🛩 Liking the video, subscribing, and clicking the bell icon can help greatly. This shows YouTube that the video is helpful, so it will be shown to more people, who may have the problem dealt with here.
🛩 If you found my video useful, you can become a Patreon at patreon.com/MrD_RC
🛩 If you prefer, you could always buy me a Coffee at mrd-rc.com/go/ko-fi
🛩 I also have merch at mrd-rc.creator-spring.com This include branded items as well as general fixed wing RC apparel.
Thank you for your time, and don't forget to fly it like you stole it!
#FrSKY #SR10 #LUA
