Uploaded February 2025 | Updated November 2026, 13 hours ago
If your Genie garage door opener has electronic travel limit adjustments instead of screws, follow these steps:
Enter Travel Limit Mode
Press and hold the "Down" arrow button until the long LED light turns blue.
Set the Down Limit
Use the Down arrow button to move the door to the fully closed position.
Once set, press the "Set" button to lock it in. The LED should flash blue and then turn solid.
Set the Up Limit
Press and hold the "Up" arrow button until the LED turns blue again.
Use the Up arrow button to move the door to the fully open position.
Press the "Set" button again to confirm.
Test the Door
Open and close the door to ensure it moves properly and does not reverse.
If the issue persists, the force settings may be too high. Let me know if you need help adjusting that
If your Genie garage door opener has electronic travel limit adjustments instead of screws, follow these steps:
Enter Travel Limit Mode
Press and hold the "Down" arrow button until the long LED light turns blue.
Set the Down Limit
Use the Down arrow button to move the door to the fully closed position.
Once set, press the "Set" button to lock it in. The LED should flash blue and then turn solid.
Set the Up Limit
Press and hold the "Up" arrow button until the LED turns blue again.
Use the Up arrow button to move the door to the fully open position.
Press the "Set" button again to confirm.
Test the Door
Open and close the door to ensure it moves properly and does not reverse.
If the issue persists, the force settings may be too high. Let me know if you need help adjusting that










