How to Finish & Paint 3D Prints (This Paint PEELS Right Off!) @3DPrintscape
How to Finish & Paint 3D Prints (This Paint PEELS Right Off!)  @3DPrintscape
Uploaded July 2026 | Updated November 2026, 4 hours ago
Straight off the printer, most 3D prints aren't ready to display or sell
πŸ”” SUPPORT THE CHANNEL
β”œ Patreon (early access + resource vault): patreon.com/3dprintscape
β”” YouTube Membership (same perks, right here): youtube.com/channel/UCUakh0dyF_l3b-W3x2DZplQ/join
β€” they need cleanup and finishing first. In this guide I'll walk you through my full workflow: knocking down support marks, sanding, and spray painting with the Tilswall Hornet electric spray gun β€” plus a peelable paint trick at the end that lets you test colors (and reshoot Etsy photos) without wasting filament.

πŸ–¨οΈ MY GEAR & RECOMMENDED PRODUCTS

β–Ά Tilswall Hornet spray gun: bit.ly/44hklHv (Discount Code: Tilsscape)


πŸ”— Links & Resources
Flashforge
β–Ά Creator 5: flashforge.sjv.io/YVj0Jq
β–Ά Creator 5 Pro: flashforge.sjv.io/5kq9v3
β–Ά E-Win: tidd.ly/4vqJrz1 (25% off code Pscape)

Creality
β–Ά SparkX i7: crealityofficialstore.sjv.io/c/5142166/3791607/25652
β–Ά SparkX i7 on Amazon: geni.us/IDV6JKl
β–Ά All Pinter’s: crealityofficialstore.sjv.io/c/5142166/2096381/25652

Anycube
β–Ά Kobra 4: tidd.ly/4dPjfIB

BIQU Technology
β–Ά Filament: tidd.ly/4ukNtsZ

β–Ά Filament on Amazon: geni.us/BJx0Gdj

⏱️ Chapters
0:00 Why raw prints aren't ready to paint
0:35 What you need to finish a print
1:30 The Tilswall Hornet spray gun (unboxing + specs)
2:45 Step 1: Cleaning up support marks
3:40 Step 2: Sanding for paint
4:25 Step 3: Spraying the lampshade
5:20 The cool part β€” peelable paint
6:20 Wrap up

━━━━━━━━━━━━━━━━━━━━━━
πŸ’¬ CONNECT
━━━━━━━━━━━━━━━━━━━━━━
β–Έ Discord: discord.gg/Bu94EYVkrU
β–Έ Patreon: patreon.com/3dprintscape
β–Έ Website: 3dprintscape.com

Questions?
Drop them in the comments or join the Discord β€” I always try to help out!

β€”
This video features the Tilswall Hornet. All opinions and techniques are my own.

#3DPrinting #3DPrintFinishing #Tilswall
How to Finish & Paint 3D Prints (This Paint PEELS Right Off!)CR-Touch or BL-Touch: My Recommendation After Testing BothBambu Lab X2D Nozzle Calibration: Post-Hotend Swap EssentialsDont Buy a Budget Laser Until You See the Laservii M1sI Tested the Revopoint POP 4 β€” 5 Scans, Easiest to HardestCreality 4.2.X Chip Change – Details Inside!Cura Temperature Tower #ShortsUnboxing the TwoTrees SK1 | Setup to First PrintYour SparkX i7 Isnt Complete Without TheseI Tested the Snapmaker U1 & Creator 5 Pro for a Week β€” Here’s the WinnerI Set Up the xTool M2 and Ran My First Print and CutStop Wasting Filament on Wrong Support Settings
3D Printscape |

How to Finish & Paint 3D Prints (This Paint PEELS Right Off!)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER