How to Engrave 3D Coins for Beginners! | Complete Laser Guide! @baronleathercraft
How to Engrave 3D Coins for Beginners! | Complete Laser Guide!  @baronleathercraft
Uploaded April 2026 | Updated November 2026, 3 days ago
Final Optimized Description
Ever wondered how to get that deep, professional 3D relief on a brass coin? In this video, I’ll walk you through the complete process—from start to finish—using an ACMER 100W MOPA fiber laser.
This beginner-friendly guide is designed to help you understand 3D engraving without the guesswork. We’ll cover how LightBurn interprets depth maps (grayscale images), how to choose the right bas-relief artwork, and how to dial in your setup for consistent, high-quality results. I’ll also share my exact LightBurn settings, along with my finishing process using Brass Black and Renaissance Wax to achieve that antique, professional look.

In this video, you’ll learn:
🧠 Depth Maps Explained — How grayscale controls engraving depth
🎯 Image Selection — Why bas-relief images with minimal shading work best
🛠️ Hardware Setup — Using an XY table and coin jig for precise alignment
⚙️ LightBurn Settings — My setup for a 100W MOPA fiber laser
✨ Finishing Techniques — Brass Black and Renaissance Wax for final results!

Software Link:
🔗 Sculptok (Depth Map Creation): sculptok.com

🔥ACMER 100 watt MOPA Fiber Laser Link:
tidd.ly/3N2zS9o

Vevor Magnetic tumbler:
https://s.vevor.com/QT0J1V

Support the Channel:
☕ Buy me a coffee if you'd like:
ko-fi.com/baronleathercraft

Everything used in this video can be found on my Amazon affiliate page. Ordering from these links helps support the channel at no additional cost to you!
🔥 My Affiliate Shop: amazon.com/shop/baronleathercraft

🔔 Subscribe: youtube.com/channel/UCim9LMjdhWVwA-sNbgCq-Xw?sub_confirmation=1
Visit My Etsy Shop:
🛒 ETSY: etsy.com/shop/baronleathercraft

Follow Me:
📸 INSTAGRAM: instagram.com/baronleathercraft
📘 FACEBOOK: facebook.com/baronleathercraft

Video Chapters:
0:00 Intro & First Impressions
0:19 Preparing & Cleaning Brass Coin Blanks
0:44 Depth Maps Explained: How 3D Engraving Works
1:47 How to Choose the Perfect 3D Image
4:29 Creating a Depth Map in Sculptok
6:10 Master 3D Settings for LightBurn
8:29 Precision Alignment on the ACMER 100W MOPA
9:09 3D Engraving Time-Lapse (Side A)
9:50 The Importance of the Cleaning Pass
10:37 3D Engraving Time-Lapse (Side B)
11:21 Tumbling & Magnetic Polishing
12:48 Antiquing with Brass Black for Deep Contrast
14:07 Sealing the Finish with Renaissance Wax
14:30 The Final Reveal!



#fiberlaser #3Dlaserengraving #3Dcoin #laserengraving #lightburn #MOPAlaser #ACMER
How to Engrave 3D Coins for Beginners! | Complete Laser Guide!Leather Plague Doctor Mask! How Did I Make This Spooky Mask?ACMER 100W MOPA Fiber Laser | Real Engraving Tests on Metal, Slate & MoreCan a 10watt Diode Laser cut leather patterns and stitching holes? Aufero Laser 2 Lu2-10a 10 Watt.ATEZR P10 10W Laser Combo Review.  Laser Cut leather and engraving, wood, acrylic, slate and glass.This is the Octopurse.  Leather Craft.Diode Laser Buying Guide: Why Spot Size is More Important Than PowerHow I Made This Sinister Plague Doctor Mask!JACCODA LE 1 10watt Diode laser reviewAlgolaser DIY KIT MK3 15 watt diode laserMy Top Selling Fiber Laser Crafts! (Surprising What Sells!)Motor Cycle Fork Bag - Leather Crafting
Baron Leather Craft |

How to Engrave 3D Coins for Beginners! | Complete Laser Guide!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER