How to Drill Holes in Metal: Master the Drill Press @TimWelds
How to Drill Holes in Metal: Master the Drill Press  @TimWelds
Uploaded June 2024 | Updated November 2026, 1 hour ago
▶️ Learn Welding and Fabrication in my $39 Online Courses
https:// courses.timwelds.com

Notes and Links:
✅ Use 135 degree split point drills in high speed steel for most materials
My favorite ones: amzn.to/4b1Y2GT
Budget friendly alternative (used in this video): amzn.to/3XjOJPq

✅ Mark precisely
My favorite little squares: amzn.to/4epdXlC
Scribe: amzn.to/3xpAvlm
Layout fluid: amzn.to/4clTcW1

✅ Center punch
My center punch set: amzn.to/3z2ZQCc

✅ Set spindle RPM
1) Start with 700 rpm for 1/2" hole in mild steel
2) Adjust for diameter, increasing rpm for smaller diameters (i.e. double for 1/4" hole, 4x for 1/8" hole, etc.)
3) Adjust for material (double for aluminum and other soft metals, half for stainless steel and harder metals)

✅ Use cutting lube
Anchorlube: amzn.to/4eoWDwX

✅ Debar your holes
Countersink: amzn.to/4bjL3kd
Deburring tool set: amzn.to/4ckVrsD

📚 Chapters
0:00 Welcome
0:14 Drill Bits 101
3:46 Marking
6:16 Center Punch
7:13 Work Holding
8:48 Setting Speed
9:44 Cutting Lubricant
9:56 Drilling Examples
12:37 Deburring
13:42 Thanks for Watching!

**This description contains affiliate links that provide a small commission to support the channel at no additional cost to you.
How to Drill Holes in Metal: Master the Drill PressFabricating with the Xlaserlab X1 Pro Laser WelderHow to Make Your Chop Saw Blade Last LongerWhy didnt I build this tool sooner?#1 Laser Welding Tip for Square Tubing - xTool MetalFabIterate Faster with High Tech ToolsMIG Welding: Short Circuit vs Spray TransferAluminum Weld Pool in Super Slow MotionEvolutions Metal Cutting Miter Saw - S15MCSBlue Laser 3D Scanner Worth The Hype? Creality Raptor TestAluminum TIG Welding Basics: Full TutorialTIG Torch Setup - TIG Welding Basics
TimWelds |

How to Drill Holes in Metal: Master the Drill Press

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER