Uploaded June 2026 | Updated November 2026, 4 days ago
Stop wondering if your serial cable is dead. If you are struggling with serial communication failures, it can be nearly impossible to tell if the issue is a faulty USB-to-RS232 adapter, incorrect software settings, or a driver mismatch. A serial loopback test is the definitive, "ground truth" diagnostic method to determine if your hardware is actually functioning.
In this video, I walk you through the process of bridging the transmit and receive pins on a PL2303 DB9 adapter to create a hardware "echo." If your characters appear on the screen, you know your hardware is solid, allowing you to focus your troubleshooting on your software or end-device configuration.
In this guide, you will learn:
How to correctly bridge pins 2 and 3 on a DB9 connector.
The difference between the "Screwdriver" and "Paperclip" methods for reliable contact.
How to configure PuTTY and verify your COM port settings via Device Manager.
Common FAQ:
Why is my test failing? Ensure you are bridging pins 2 and 3 specifically. If you have a different pinout, the test will not echo.
Do I need special software? No, any serial terminal emulator like PuTTY, Tera Term, or Hercules will work perfectly.
Is this safe? Yes, the loopback test is a standard, low-voltage diagnostic procedure that will not damage your adapter.
Video Chapters
0:00 Introduction to Loopback Testing
0:12 Hardware Loopback Connection Methods (Screwdriver vs. Paperclip)
1:40 Software Setup and Testing (Device Manager & PuTTY)
2:46 Interpreting Test Results (Troubleshooting Success vs. Failure)
Stop wondering if your serial cable is dead. If you are struggling with serial communication failures, it can be nearly impossible to tell if the issue is a faulty USB-to-RS232 adapter, incorrect software settings, or a driver mismatch. A serial loopback test is the definitive, "ground truth" diagnostic method to determine if your hardware is actually functioning.
In this video, I walk you through the process of bridging the transmit and receive pins on a PL2303 DB9 adapter to create a hardware "echo." If your characters appear on the screen, you know your hardware is solid, allowing you to focus your troubleshooting on your software or end-device configuration.
In this guide, you will learn:
How to correctly bridge pins 2 and 3 on a DB9 connector.
The difference between the "Screwdriver" and "Paperclip" methods for reliable contact.
How to configure PuTTY and verify your COM port settings via Device Manager.
Common FAQ:
Why is my test failing? Ensure you are bridging pins 2 and 3 specifically. If you have a different pinout, the test will not echo.
Do I need special software? No, any serial terminal emulator like PuTTY, Tera Term, or Hercules will work perfectly.
Is this safe? Yes, the loopback test is a standard, low-voltage diagnostic procedure that will not damage your adapter.
Video Chapters
0:00 Introduction to Loopback Testing
0:12 Hardware Loopback Connection Methods (Screwdriver vs. Paperclip)
1:40 Software Setup and Testing (Device Manager & PuTTY)
2:46 Interpreting Test Results (Troubleshooting Success vs. Failure)










