E&EP AUTOS | How to convert cordless drill's 14.4 Volts Ni-Cd battery into Li-on 18650 battery / Hx-4S-A01 BMS @ElectricalElectronicsProjects | Uploaded January 2018 | Updated October 2024, 5 hours ago.
Hi Guys here is the new video: How to convert cordless drill's 14.4 Volts Ni-Cd battery into Li-on battery / Hx-4S-A01 BMS.from my "Electrical and electronics projects" "E&EP" Channel.
In this video i have showed you guys how to convert cordless drill's 14.4 Volts Ni-Cd battery into Li-on battery using Hx-4S-A01 BMS.The complete detail is in video watch video to view the connection diagram as well.
BMS:Hx-4S-A01
goo.gl/E1zfVV
How to make 13000 mAh Power bank from old laptop battery
youtu.be/TfrGTIUoom8
Music:
Distrion & Alex Skrindo - Entropy [NCS Release]
youtube.com/watch?v=iaKgF1Vf5bQ
BMS Precautions:
1. Please strictly follow the wiring 0V (B -), 3.7V (B1), 7.4V (B2), 11.1V (B3) 14.8V(B+), P+(Input), P-(output), do not deliberately short circuit.
2. Please charge after connecting the line, then it will has output.
3. When connecting three groups of batteries, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. Discharge test, the voltage drops quickly when the group of battery time difference battery.
4. Please do not mix the battery and the poor battery together! 4 sets of battery capacity / resistance closer to the better! (Three good batteries +1 a poor battery use effect = 4 poor battery use effect).
Hi Guys here is the new video: How to convert cordless drill's 14.4 Volts Ni-Cd battery into Li-on battery / Hx-4S-A01 BMS.from my "Electrical and electronics projects" "E&EP" Channel.
In this video i have showed you guys how to convert cordless drill's 14.4 Volts Ni-Cd battery into Li-on battery using Hx-4S-A01 BMS.The complete detail is in video watch video to view the connection diagram as well.
BMS:Hx-4S-A01
goo.gl/E1zfVV
How to make 13000 mAh Power bank from old laptop battery
youtu.be/TfrGTIUoom8
Music:
Distrion & Alex Skrindo - Entropy [NCS Release]
youtube.com/watch?v=iaKgF1Vf5bQ
BMS Precautions:
1. Please strictly follow the wiring 0V (B -), 3.7V (B1), 7.4V (B2), 11.1V (B3) 14.8V(B+), P+(Input), P-(output), do not deliberately short circuit.
2. Please charge after connecting the line, then it will has output.
3. When connecting three groups of batteries, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. Discharge test, the voltage drops quickly when the group of battery time difference battery.
4. Please do not mix the battery and the poor battery together! 4 sets of battery capacity / resistance closer to the better! (Three good batteries +1 a poor battery use effect = 4 poor battery use effect).