How To Configure Your IP Address on Your C-more CM5 @automationdirect
How To Configure Your IP Address on Your C-more CM5  @automationdirect
Uploaded August 2026 | Updated November 2026, 5 days ago
Need to change the IP address on your C-more CM5 HMI? In this video, we'll walk through the two methods for configuring the Ethernet IP address on a CM5 panel.

First, you'll learn how to change the IP address directly from the HMI's built-in System Screen for quick network configuration. Then, we'll show you how to configure the IP address within the C-more programming software and explain how the Save Settings to Project option determines which network settings the HMI uses after a power cycle.

In this video, you'll learn:
• How to access the CM5 System Screen
• How to configure the HMI's IP address, subnet mask, gateway, and DNS settings
• The difference between System Screen and Project network settings
• How Save Settings to Project affects network configuration
• How to transfer the updated project to the CM5 HMI

Whether you're setting up a new panel or troubleshooting network communications, this tutorial will help you configure your CM5 HMI correctly.

***This video is for educational purposes only. Always follow your company's safety procedures and all applicable local codes and regulations. AutomationDirect is not liable for any misuse of this information.

To learn more: AutomationDirect.com/C-more?utm_source=g_EIhuhNHsw&utm_medium=VideoTeamDescription - (VID-CR-0053)

Online Support Page: community.automationdirect.com/s/?utm_source=g_EIhuhNHsw&utm_medium=VideoTeamDescription

**Please check our website for our most up-to-date product pricing and availability.

Related AutomationDirect.com part numbers: CM5-PGMSW, CM5-T10W, CM5-T12W, CM5-T15W, CM5-T22W, CM5-T4W, CM5-T7W, CM5-USER-M, HMI-10W-COV, HMI-10W-GSK, HMI-12W-COV, HMI-12W-GSK, HMI-15W-COV, HMI-15W-GSK, HMI-22W-COV, HMI-22W-GSK, HMI-3TB, HMI-4W-COV, HMI-4W-GSK, HMI-7W-COV, HMI-7W-GSK, HMI-BRK-1, HMI-BRK-2, HMI-LOGO-LBL, CM5-RHMI
How To Configure Your IP Address on Your C-more CM5DURAPulse GS30 Full Vector Control Setup from AutomationDirectArdent Multimeters & Insulation Tester from AutomationDirectWhat is a Limit Alarm? from AutomationDirectLika Draw Wire Encoders from AutomationDirectProductivity Suite Version Control from AutomationDirectToshiba AS3 AC Drive Analog Speed Reference from AutomationDirectWhat is an Ultrasonic Sensor? from AutomationDirectToshiba AS3 AC Drive Single Phase Input from AutomationDirectdi-soric Vision Cameras from AutomationDirectSureServo2 Torque Mode Part 2: Testing from AutomationDirectStride Ethernet Field I/O Modules from AutomationDirect
AutomationDirect.com |

How To Configure Your IP Address on Your C-more CM5

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER