How To Configure Inter Vlan Routing on Juniper Devices @Liv4IT

Uploaded February 2024 | Updated September 2026, 2 weeks ago

How To Configure Inter Vlan Routing on Juniper Devices

This video provides information on how to create a routed VLAN interface (RVI) for inter VLAN routing.

In one of my previous Junos Basics videos, I covered the configuration steps required to create VLAN’s on a Juniper switch and assign interfaces to them. In this video I’ll step through the config to enable routing between these VLAN’s and also show a couple of verification commands to check it’s working as expected.

Firstly we configure a routed VLAN interface (RVI) for each VLAN, which is the equivalent of an SVI in Ciscoland.

Secondly, we link the VLAN’s to the RVI’s. Note that we specify the unit numbers we set in the previous step for each layer 3 interface.

For an RVI to be up and the routing table to have a valid route to it’s VLAN there has to be at least one interface in that VLAN connected and up.

🌸 Support channel & make donation :
paypal.me/aminenina/10

🌸 Subscribe for more videos :
Youtube: youtube.com/user/aminosninatos

🌸 Follow me On Social Media
Facebook : facebook.com/aminosninatos

***********************************************************************

🌸 How To Check Bad Blocks Or Bad Sectors On a Hard Disk In Linux
https://www.youtube.com/watch?v=jE-I9...

🌸 Linux How To Partition a Hard Drive Using the Parted Command
https://www.youtube.com/watch?v=2IoEW...

🌸 Checking or Repairing a File System using fsck in Linux
https://www.youtube.com/watch?v=CcV_M...

🌸 How To Monitor the Health of Your Hard Drive in Linux using SMART
https://www.youtube.com/watch?v=z1z9R...

🌸 Linux iotop: Monitor your disk Input/Output
https://www.youtube.com/watch?v=pWG4v...

🌸 How To use the “du” (Disk Usage) Command in Linux
https://www.youtube.com/watch?v=RA4bM...

🌸 How To View Manipulate System Logs In Linux Using Journalctl Command
youtube.com/watch?v=NE-fT-Fwvgw&t=3s

🌸 How To Sync And Backup Files In Linux Using Rsync Command
youtube.com/watch?v=aIMbg7vG6Rg&t=10s

🌸 Linux cURL Command Tips and Tricks
youtube.com/watch?v=hA3BAALWFJI

🌸 Linux tail and multitail commands
youtube.com/watch?v=QnPyWNyCn-U

🌸 Linux How To view Log Files
youtube.com/watch?v=CEYhs_9L01M&t=2s

🌸 How To use the History Command On Linux
youtube.com/watch?v=RkxIWlypB-s

🌸 Tips and Tricks How To manipulate Text Files on Linux
youtube.com/watch?v=Zk9M1w55XO0

🌸 How to Archive, Compress and Extract Files Using the tar Command on Linux
youtube.com/watch?v=8j-ZzOfbclM&t=2s

🌸 Linux - How to split larger files into smaller parts
youtube.com/watch?v=DaC5AWjmQXk

🌸 Linux commands : Top
youtube.com/watch?v=RM7ck63mcHQ

***********************************************************************
#junipernetworks #vlan #rvi

How to Export and Import Hyper-V Virtual Machines

🚀 MTP GGUF Models Explained | What They Are & How to Use Them with llama-server

How To Setup Notifications On Proxmox With Gotify

$🚀 Automate MikroTik Router Configuration with Terraform | Infrastructure as Code Tutorial 🚀 Automate MikroTik Router Configuration with Terraform | Infrastructure as Code Tutorial Tired of logging into WinBox or SSH every time you need to change a firewall rule, add a DHCP lease, or reconfigure an interface? In this complete step-by-step tutorial, youll learn how to use Terraform to fully automate your MikroTik RouterOS configuration — the same way DevOps engineers manage cloud infrastructure, but applied directly to your network hardware. Whether youre managing a homelab, a small business network, or a multi-site enterprise deployment, this video will show you how to bring the power of Infrastructure as Code (IaC) to your MikroTik routers — making your configs repeatable, version-controlled, and disaster-recovery ready. 💡 Why Terraform + MikroTik? MikroTik routers are incredibly powerful — but managing them at scale manually is slow, error-prone, and impossible to audit. With Terraform, you define your entire router configuration in simple .tf files, commit them to Git, and apply changes in seconds. Forget clicking through menus or memorizing RouterOS commands — your config becomes code. ✅ Reproducible — spin up identical configs across multiple routers instantly ✅ Version-controlled — track every change in Git like a software project ✅ Self-documenting — your .tf files are your documentation ✅ Disaster-recovery ready — restore your full config in one command ✅ Team-friendly — collaborate on network changes with pull requests and code reviews 👍 Code in the video: - providers.tf: terraform { required_providers { routeros = { source = terraform-routeros/routeros version = ⟩= 1.0.0 } } } provider routeros { hosturl = var.mikrotik_host username = var.mikrotik_username password = var.mikrotik_password insecure = true # Usually set to true unless youve installed a custom SSL cert on the router } - variables.tf: variable mikrotik_host { type = string description = The IP address or hostname of the MikroTik router (e.g., 192.168.88.1) } variable mikrotik_username { type = string description = The admin username for the MikroTik router } variable mikrotik_password { type = string description = The password for the MikroTik router sensitive = true } variable new_identity { type = string description = The new name for your router default = MikroTik-HQ } - main.tf resource routeros_system_identity my_router { name = var.new_identity } - credentials.auto.tfvars.tf mikrotik_host = 192.168.1.x mikrotik_username = admin mikrotik_password = xxxxxx new_identity = MikroTik-HQ 👍 If you found this video useful, like, subscribe, and share to support more networking tutorials about BGP, MikroTik, routing, and network labs. 🌸 Buy me a coffee : https://buymeacoffee.com/liv4it 🌸 Support channel & make donation : https://www.paypal.me/aminenina/10 🌸 Subscribe for more videos : Youtube: https://www.youtube.com/user/aminosninatos 🌸 Follow me On Social Media Facebook : https://www.facebook.com/aminosninatos/ *********************************************************************** 🌸 🔐How to Set Up SSH Key Authentication on MikroTik Router https://youtu.be/Ks0YcPUclWc 🌸 📌Mikrotik BGP Peering with DN42 Network https://youtu.be/hHDcGfjJH0I 🌸 📌 MikroTik RouterOS Scripting https://youtu.be/EsoWYQH6Gk0 🌸 🔐I Asked AI to Fix My MikroTik Firewall – Here’s What Happened https://youtu.be/RbI-X0ZXXbg 🌸 🔐 MikroTik - Protect Your Network from Malicious IPs Using Q-Feeds https://youtu.be/UekviUhSu4w 🌸 How to Configure DNS over HTTPS (DoH) on MikroTik RouterOS v7 | Step-by-Step Guide https://youtu.be/CuKNz3_wWIY 🌸 How to Configure MikroTik Router as a DNS Server | Step-by-Step Guide (RouterOS v6 & v7) https://youtu.be/XdcHRmcmm1o 🌸 MikroTik FastTrack Explained | Boost Your Router Speed & Reduce CPU Usage https://youtu.be/-uGWSsv5R9Y 🌸 MikroTik Firewall Filter Rules Explained | Secure Your Router Against Attacks https://youtu.be/CSPhjxYRU0I 🌸 How To Secure Your MikroTik Router – Complete RouterOS Hardening Guide https://youtu.be/Hb0hiZLOzfg 🌸 MikroTik RouterOS Connect LAN Network To The Internet https://youtu.be/CSU-GqJF27k 🌸 MikroTik RouterOS Basic Configuration | PPPoE Internet Setup Step-by-Step https://youtu.be/-XA2nMEz51M 🌸 How to Install MikroTik RouterOS Long-Term (LTS) on VMware ESXi | Step-by-Step Guide https://youtu.be/bZaempHD84I 🌸 MikroTik RouterOS LTS Explained & Install on Proxmox VE https://youtu.be/NRyGPpnQGp8 🌸 How To Install Packages On Immutable OS Fedora Silverblue https://youtu.be/EfEQnRb0o2s 🌸 Proxmox Containers with Fedora CoreOS Install https://youtu.be/iEKlltIsbkE 🌸 How To run Docker containers (OCI Images) natively in Proxmox 9.1 https://youtu.be/atOEMusLVtQ 🌸 Proxmox Install ProxMenux Monitor https://youtu.be/VpRGceK8ToQ *********************************************************************** #Terraform #MikroTik #RouterOS$

🦙 llama-server Command Line Overview | Complete Guide to Every Option in llama.cpp

How To Configure Basic Settings for NixOS

How To Use The Awesome Linux Bat Command

MikroTik RouterOS LTS Explained & Install on Proxmox VE

Proxmox Backup with Veeam Backup & Replication 12.2