Uploaded June 2026 | Updated September 2026, 2 weeks ago
Changing the temperature on a Frigidaire Gallery refrigerator or freezer is usually straightforward, but the exact method depends on whether your unit has a digital control panel or a dial system.
Digital Control Panel (most Frigidaire Gallery models)
These models typically have a touch control panel inside the refrigerator or on the door.
Steps:
Locate the control panel
Usually inside the fridge (top or side wall) or on the door display.
Unlock the controls if needed
Press and hold “Lock” for about 3 to 5 seconds until it unlocks.
Select refrigerator or freezer settings
Press the “Temp” button or choose the fridge/freezer selection buttons.
Adjust the temperature
Use the + / – buttons or up/down arrows to raise or lower the temperature.
Wait for it to stabilize
It can take up to 24 hours for the temperature to fully adjust.
Recommended Settings
Refrigerator: 37°F (3°C)
Freezer: 0°F (-18°C)
Dial or Slider Models (older units)
Some models use a simple numbered dial or slider.
Turn toward “colder” or higher numbers to make it colder
Turn toward “warmer” or lower numbers to reduce cooling
These are approximate settings, so using a thermometer is helpful for accuracy
Important Notes
Avoid making frequent adjustments; allow 24 hours between changes
Make sure air vents inside the refrigerator are not blocked
If you see an error or flashing display, the unit may still be cooling or resetting
Disclaimer: As an Amazon Associate I earn from qualified purchases.
Changing the temperature on a Frigidaire Gallery refrigerator or freezer is usually straightforward, but the exact method depends on whether your unit has a digital control panel or a dial system.
Digital Control Panel (most Frigidaire Gallery models)
These models typically have a touch control panel inside the refrigerator or on the door.
Steps:
Locate the control panel
Usually inside the fridge (top or side wall) or on the door display.
Unlock the controls if needed
Press and hold “Lock” for about 3 to 5 seconds until it unlocks.
Select refrigerator or freezer settings
Press the “Temp” button or choose the fridge/freezer selection buttons.
Adjust the temperature
Use the + / – buttons or up/down arrows to raise or lower the temperature.
Wait for it to stabilize
It can take up to 24 hours for the temperature to fully adjust.
Recommended Settings
Refrigerator: 37°F (3°C)
Freezer: 0°F (-18°C)
Dial or Slider Models (older units)
Some models use a simple numbered dial or slider.
Turn toward “colder” or higher numbers to make it colder
Turn toward “warmer” or lower numbers to reduce cooling
These are approximate settings, so using a thermometer is helpful for accuracy
Important Notes
Avoid making frequent adjustments; allow 24 hours between changes
Make sure air vents inside the refrigerator are not blocked
If you see an error or flashing display, the unit may still be cooling or resetting
Disclaimer: As an Amazon Associate I earn from qualified purchases.
