Uploaded March 2023 | Updated November 2026, 5 days ago
Want to control your CPU clock speeds and performance profiles on Linux?
In this tutorial, I’ll show you how to install, configure and use cpupower to change CPU governors, limit CPU frequencies and optimize Linux for either maximum performance or improved power efficiency.
cpupower is a powerful Linux utility for CPU frequency scaling and power management, allowing you to:
• Change CPU governors
• Set minimum and maximum CPU frequencies
• Improve gaming performance
• Reduce temperatures and fan noise
• Improve battery life on laptops
• Fine-tune CPU behavior for workloads and thermals
What is a CPU Governor?
A CPU governor controls how aggressively your CPU changes clock speeds.
Common governors include:
performance
• Keeps the CPU running at maximum non-overclocked frequency
• Best for gaming, rendering and low-latency workloads
powersave
• Prioritizes lower clock speeds and reduced power usage
• Best for battery life and cooler operation
schedutil / ondemand
• Dynamically adjusts clock speed based on workload
• Good balance between performance and efficiency
Step-by-step guide
Step 1 — Install cpupower
Arch Linux / EndeavourOS / Manjaro
Install cpupower:
sudo pacman -S cpupower
Ubuntu / Debian-Based Distributions
Install Linux CPU tools:
sudo apt install linux-tools-generic
Fedora
Install cpupower:
sudo dnf install kernel-tools
Step 2 — Check CPU Frequency Information
Run:
cpupower frequency-info
This displays:
• CPU hardware frequency limits
• Current governor
• Current frequency policy
• Available governors
• Scaling driver information
Useful for verifying:
• Whether frequency scaling works properly
• Available performance profiles
• Current CPU behavior
Step 3 — Configure cpupower Permanently
Arch-Based Distributions
Edit:
sudo nano /etc/default/cpupower
Inside this file you can configure:
• Default governor
• Minimum CPU frequency
• Maximum CPU frequency
Example:
governor='performance'
min_freq='3.0GHz'
max_freq='4.5GHz'
This forces:
• Higher minimum clocks
• Maximum boost frequency availability
• More aggressive CPU performance behavior
After saving the file:
Enable the service:
sudo systemctl enable cpupower.service
Reboot your system to apply changes.
Useful cpupower Commands
Set governor manually:
sudo cpupower frequency-set -g performance
Limit maximum frequency:
sudo cpupower frequency-set -u 4.0GHz
Limit minimum frequency:
sudo cpupower frequency-set -d 2.0GHz
GUI Alternative for Ubuntu & GNOME
If you prefer a graphical interface:
cpupower-gui
github.com/vagnum08/cpupower-gui
This allows you to:
• Change governors visually
• Set CPU frequency limits
• Monitor CPU scaling behavior
• Configure laptop power profiles easily
Why use cpupower?
• Improve Linux gaming performance
• Reduce thermal throttling
• Lower laptop temperatures
• Reduce fan noise
• Extend battery life
• Optimize rendering and workstation workloads
Topics covered:
• Linux CPU governor tutorial
• cpupower Linux guide
• Linux performance optimization
• Linux laptop battery optimization
• CPU frequency scaling Linux
• Linux thermal management
• Linux gaming tweaks
• Arch Linux cpupower
• Ubuntu CPU tuning
If you found the video helpful, consider subscribing for more Linux tutorials, gaming optimization and PC performance guides.
#Linux #cpupower #LinuxPerformance #CPU #LinuxGaming #Ubuntu #ArchLinux #Fedora #Performance #LaptopOptimization #GamingOnLinux #OpenSource #LinuxTutorial
Want to control your CPU clock speeds and performance profiles on Linux?
In this tutorial, I’ll show you how to install, configure and use cpupower to change CPU governors, limit CPU frequencies and optimize Linux for either maximum performance or improved power efficiency.
cpupower is a powerful Linux utility for CPU frequency scaling and power management, allowing you to:
• Change CPU governors
• Set minimum and maximum CPU frequencies
• Improve gaming performance
• Reduce temperatures and fan noise
• Improve battery life on laptops
• Fine-tune CPU behavior for workloads and thermals
What is a CPU Governor?
A CPU governor controls how aggressively your CPU changes clock speeds.
Common governors include:
performance
• Keeps the CPU running at maximum non-overclocked frequency
• Best for gaming, rendering and low-latency workloads
powersave
• Prioritizes lower clock speeds and reduced power usage
• Best for battery life and cooler operation
schedutil / ondemand
• Dynamically adjusts clock speed based on workload
• Good balance between performance and efficiency
Step-by-step guide
Step 1 — Install cpupower
Arch Linux / EndeavourOS / Manjaro
Install cpupower:
sudo pacman -S cpupower
Ubuntu / Debian-Based Distributions
Install Linux CPU tools:
sudo apt install linux-tools-generic
Fedora
Install cpupower:
sudo dnf install kernel-tools
Step 2 — Check CPU Frequency Information
Run:
cpupower frequency-info
This displays:
• CPU hardware frequency limits
• Current governor
• Current frequency policy
• Available governors
• Scaling driver information
Useful for verifying:
• Whether frequency scaling works properly
• Available performance profiles
• Current CPU behavior
Step 3 — Configure cpupower Permanently
Arch-Based Distributions
Edit:
sudo nano /etc/default/cpupower
Inside this file you can configure:
• Default governor
• Minimum CPU frequency
• Maximum CPU frequency
Example:
governor='performance'
min_freq='3.0GHz'
max_freq='4.5GHz'
This forces:
• Higher minimum clocks
• Maximum boost frequency availability
• More aggressive CPU performance behavior
After saving the file:
Enable the service:
sudo systemctl enable cpupower.service
Reboot your system to apply changes.
Useful cpupower Commands
Set governor manually:
sudo cpupower frequency-set -g performance
Limit maximum frequency:
sudo cpupower frequency-set -u 4.0GHz
Limit minimum frequency:
sudo cpupower frequency-set -d 2.0GHz
GUI Alternative for Ubuntu & GNOME
If you prefer a graphical interface:
cpupower-gui
github.com/vagnum08/cpupower-gui
This allows you to:
• Change governors visually
• Set CPU frequency limits
• Monitor CPU scaling behavior
• Configure laptop power profiles easily
Why use cpupower?
• Improve Linux gaming performance
• Reduce thermal throttling
• Lower laptop temperatures
• Reduce fan noise
• Extend battery life
• Optimize rendering and workstation workloads
Topics covered:
• Linux CPU governor tutorial
• cpupower Linux guide
• Linux performance optimization
• Linux laptop battery optimization
• CPU frequency scaling Linux
• Linux thermal management
• Linux gaming tweaks
• Arch Linux cpupower
• Ubuntu CPU tuning
If you found the video helpful, consider subscribing for more Linux tutorials, gaming optimization and PC performance guides.
#Linux #cpupower #LinuxPerformance #CPU #LinuxGaming #Ubuntu #ArchLinux #Fedora #Performance #LaptopOptimization #GamingOnLinux #OpenSource #LinuxTutorial










