Uploaded March 2019 | Updated November 2026, 8 hours ago
How to calculate the yardage for a yoke sweater from a blocked gauge swatch and a schematic, in conjunction with the ITAG-Yoke tutorial. The swatch can be knit flat or in the round; both are shown, and the numbers from the flat swatch are used going forward. Measure the swatch’s width and length (or use square centimeters) and weigh it in grams. Grams divided by square inches gives grams per square inch — 4.8 grams and 10.3125 square inches in the example, or 0.4654 grams per square inch. Only a few schematic measurements are needed: finished chest circumference (body plus ease; 37 inches plus 3 inches of ease is a 40-inch sweater in the example), the length from the back neck to the hem (22.5 inches), the upper-arm circumference (15.5 inches), and the arm length from the back neck to the cuff (30 inches). The yoke is simplified into boxes rather than circles or a tapered wrist, which keeps the math easy and leaves a little extra yarn. Body area is circumference times length: 40 × 22.5 = 900 square inches. Sleeve length on the schematic is the total arm length minus a quarter of the chest circumference (30 minus 10 = 20 inches). Two sleeves at 15.5 × 20 = 620 square inches. The total is 1,520 square inches, times 0.4654, or about 707 grams. For 100-gram skeins that is at least seven, and eight if one extra is bought for swatching (sixteen 50-gram skeins). Compared with Ann Budd’s The Knitter’s Handy Book of Top-Down Sweaters, the book lists about 1,210 yards for the same stitch gauge; 707 grams of a 200-yard, 100-gram skein is about 1,414 yards, or roughly one skein more, which is a comfortable margin.
Chapters
0:12 Introduction: yardage from a swatch and a schematic
0:27 Swatch knit flat and swatch in the round
1:08 Calculating the area of the swatch
1:57 Weighing the swatch
2:36 Grams per square inch
3:36 Measurements needed on the schematic
5:21 Squaring the schematic (keep it simple)
6:00 Area of the body
6:49 Area of the sleeves
8:20 Total area, grams, and how many skeins
9:57 Comparison with Ann Budd’s book
Related videos
- How to Calculate Yardage for a Raglan Sweater from a Schematic: youtu.be/2nbNhPGY7LA
- How to Calculate Yarn Needed for a Drop-Shoulder Sweater: youtu.be/GqYb8r3F5v0
- How to Take Body Measurements for a Yoke Sweater: youtu.be/U2gI_J01p9U
- How to Measure for a Drop-Shoulder Sweater (Four Body Types): youtu.be/8fr1CVaJQZM
- How to Make a Gauge Swatch for a Sweater (Don't Round Your Stitch Gauge): youtu.be/0nECq0TZS8E
- How to Use Ann Budd for a Yoke: Measurements, Ease, and Gauge (Part 1): youtu.be/dC5W0pWWHQc
ITAG-Yoke KAL: ravelry.com/patterns/library/itag-yoke-kal
More on this topic: see my playlists "Sweater Construction & Finishing: Seaming, Pockets, Steeks, Weaving in Ends" and "ITAG-Yoke" on the channel.
Live Zoom classes (Bootcamps): masteryourknitting.com
If you enjoy my videos please subscribe and consider buying me a coffee on Ko-fi - ko-fi.com/suzannebryan
Where to find me -
Suzanne - Off the Cuff - youtube.com/channel/UCQBgFUvQzjz1RUm9NsgEA1A
Knitting with Suzanne Bryan on Ravelry - ravelry.com/groups/knitting-with-suzanne-bryan
Knitting with Suzanne Bryan on FB- facebook.com/groups/1769286026429876
KnittingSuzanne on Ravelry - ravelry.com/people/KnittingSuzanne
Blog: knittingsuzanne.com
#yardage #yokesweater #gaugeswatch #schematic #annbudd
How to calculate the yardage for a yoke sweater from a blocked gauge swatch and a schematic, in conjunction with the ITAG-Yoke tutorial. The swatch can be knit flat or in the round; both are shown, and the numbers from the flat swatch are used going forward. Measure the swatch’s width and length (or use square centimeters) and weigh it in grams. Grams divided by square inches gives grams per square inch — 4.8 grams and 10.3125 square inches in the example, or 0.4654 grams per square inch. Only a few schematic measurements are needed: finished chest circumference (body plus ease; 37 inches plus 3 inches of ease is a 40-inch sweater in the example), the length from the back neck to the hem (22.5 inches), the upper-arm circumference (15.5 inches), and the arm length from the back neck to the cuff (30 inches). The yoke is simplified into boxes rather than circles or a tapered wrist, which keeps the math easy and leaves a little extra yarn. Body area is circumference times length: 40 × 22.5 = 900 square inches. Sleeve length on the schematic is the total arm length minus a quarter of the chest circumference (30 minus 10 = 20 inches). Two sleeves at 15.5 × 20 = 620 square inches. The total is 1,520 square inches, times 0.4654, or about 707 grams. For 100-gram skeins that is at least seven, and eight if one extra is bought for swatching (sixteen 50-gram skeins). Compared with Ann Budd’s The Knitter’s Handy Book of Top-Down Sweaters, the book lists about 1,210 yards for the same stitch gauge; 707 grams of a 200-yard, 100-gram skein is about 1,414 yards, or roughly one skein more, which is a comfortable margin.
Chapters
0:12 Introduction: yardage from a swatch and a schematic
0:27 Swatch knit flat and swatch in the round
1:08 Calculating the area of the swatch
1:57 Weighing the swatch
2:36 Grams per square inch
3:36 Measurements needed on the schematic
5:21 Squaring the schematic (keep it simple)
6:00 Area of the body
6:49 Area of the sleeves
8:20 Total area, grams, and how many skeins
9:57 Comparison with Ann Budd’s book
Related videos
- How to Calculate Yardage for a Raglan Sweater from a Schematic: youtu.be/2nbNhPGY7LA
- How to Calculate Yarn Needed for a Drop-Shoulder Sweater: youtu.be/GqYb8r3F5v0
- How to Take Body Measurements for a Yoke Sweater: youtu.be/U2gI_J01p9U
- How to Measure for a Drop-Shoulder Sweater (Four Body Types): youtu.be/8fr1CVaJQZM
- How to Make a Gauge Swatch for a Sweater (Don't Round Your Stitch Gauge): youtu.be/0nECq0TZS8E
- How to Use Ann Budd for a Yoke: Measurements, Ease, and Gauge (Part 1): youtu.be/dC5W0pWWHQc
ITAG-Yoke KAL: ravelry.com/patterns/library/itag-yoke-kal
More on this topic: see my playlists "Sweater Construction & Finishing: Seaming, Pockets, Steeks, Weaving in Ends" and "ITAG-Yoke" on the channel.
Live Zoom classes (Bootcamps): masteryourknitting.com
If you enjoy my videos please subscribe and consider buying me a coffee on Ko-fi - ko-fi.com/suzannebryan
Where to find me -
Suzanne - Off the Cuff - youtube.com/channel/UCQBgFUvQzjz1RUm9NsgEA1A
Knitting with Suzanne Bryan on Ravelry - ravelry.com/groups/knitting-with-suzanne-bryan
Knitting with Suzanne Bryan on FB- facebook.com/groups/1769286026429876
KnittingSuzanne on Ravelry - ravelry.com/people/KnittingSuzanne
Blog: knittingsuzanne.com
#yardage #yokesweater #gaugeswatch #schematic #annbudd

![ITAG Set in Sleeve Tutorial Talking About Pockets
During this livestream I will be discussing a variety of pockets and how to use them in this garment. I will also talk more about using knitters graph paper in regards to stitch and row equivalency.
This is associated with the ITAG - Set In Sleeve Swatch to Sweater Tutorial by Suzanne Bryan. You can find the pattern here - https://ravel.me/itag set-in-sleeve-sweater-tutorial.
If you would like to be added to my email list click here - https://lp.constantcontactpages.com/su/ieNEW4F
knitters graph paper - http://tata-tatao.to/knit/matrix/e-index.html
Time stamps for 5-1-21
0:00—introductions
5:30—Suzanne shows us various pocket designs on ¼ scale graph paper - playlist for creating fabrics for pockets - [https://youtube.com/playlist?list=PLLKJ9GuhEEwkSRCAWaFz030iD6_WnZPF0
11:48—Suzanne shows us the pocket from her original ITAG sweater
12:40—Suzanne pocket placed on knitter’s graph paper
15:35—Frank Jernigan joins us to showcase his sweater website and several sweaters made from patterns generated by his website’s software; https://phrancko.com
21:07—how long did it take Frank to develop his website?
22:34—some of the sweater’s made from Frank’s website
26:19—how to join one of Frank’s KAL’s https://phrancko.com
29:27—continuation of the graphed pocket and how to graph a cable on it
31:55—how to work stitch equivalency on knitter’s graph paper when you have multiple gauges
33:14—figuring how to have ribbing flow into cables
37:48—the edge cable of the pocket and how it lays at the top on the sweater surface
39:34—is there a knitter’s graph paper that is 7x9? [http://tata-tatao.to/knit/matrix/e-index.html
42:41—should a pocket be added to the sloper to make sure of placement?
43:24—is compensation for cable flare invisible when working up from ribbing?
48:34—has Suzanne made her pocket on a pullover?
49:15—a resource for grading patterns [sistermountain.com]
50:04—how to keep the bottom edge from rolling when not using ribbing
52:01—the armscye on my sloper seems too large; what do I do now?
If you enjoy my videos please subscribe and consider buying me a coffee on Ko-fi - https://ko-fi.com/suzannebryan
Where to find me:
Knitting with Suzanne Bryan on Ravelry - https://www.ravelry.com/groups/knitting-with-suzanne-bryan
Knitting with Suzanne Bryan on FB- https://www.facebook.com/groups/1769286026429876/
KnittingSuzanne on Ravelry - https://www.ravelry.com/people/KnittingSuzanne
Suzannes Blog - http://www.knittingsuzanne.com ITAG Set in Sleeve Tutorial Talking About Pockets](https://i.ytimg.com/vi/aoK_R81MLlc/mqdefault.jpg)








