Uploaded May 2020 | Updated September 2026, 2 hours ago
The easy Digi is a Digital Radio interface created to reduce AC hum on your signal, and level the output some.
You can buy them here:
ebay.com/itm/EASY-DIGI-Interface-Card-FT-8-PSK-RTTY-SSTV-NBEMS-JT-65-FT-8-FT-4-others/323587026051?hash=item4b574a2c83:g:c4IAAOSwWLBaFdWB
The Easy Digi is a cost effective way to get on the air with digital ham radio with modes like SSTV, PSK31, FT8, JS8Call and many more.
You buy the kit above, and create the wires for your radio, and sound card and you're good to go.
The video takes you through the steps of assembling the Easy Digi, and get it ready to be interfaced to your radio.
Part 2 will be up this Friday, where we make the cables, and finish this project up.
Sound card used:
ebay.com/itm/Mini-USB-2-0-3D-Virtual-12Mbps-External-7-1-Channel-Audio-Sound-Card-Adapter-PC/331385983543?epid=562090926&hash=item4d2824d237:g:nF0AAOSwIBBUaunP
Case Used:
ebay.com/itm/Aluminum-DIY-Project-Box-Enclosure-Case-PCB-Amplifier-Electronic-130-95-55mm/142615126986?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
If you like this content, make sure you hit the subscribe button, and the notification bell, so you will see my future videos. Uploads will go up on Monday and Fridays at 14:00 eastern time, and a live-stream will be held Sunday evenings.
Follow me on Twitter:
twitter.com/HamModern
Follow my Instagram:
instagram.com/modernham
Make sure to check out my blog, and shop over at:
themodernham.com .
⚡ Join the ModernHams Discord: ⚡
discord.gg/EbP9dTMrTU
The easy Digi is a Digital Radio interface created to reduce AC hum on your signal, and level the output some.
You can buy them here:
ebay.com/itm/EASY-DIGI-Interface-Card-FT-8-PSK-RTTY-SSTV-NBEMS-JT-65-FT-8-FT-4-others/323587026051?hash=item4b574a2c83:g:c4IAAOSwWLBaFdWB
The Easy Digi is a cost effective way to get on the air with digital ham radio with modes like SSTV, PSK31, FT8, JS8Call and many more.
You buy the kit above, and create the wires for your radio, and sound card and you're good to go.
The video takes you through the steps of assembling the Easy Digi, and get it ready to be interfaced to your radio.
Part 2 will be up this Friday, where we make the cables, and finish this project up.
Sound card used:
ebay.com/itm/Mini-USB-2-0-3D-Virtual-12Mbps-External-7-1-Channel-Audio-Sound-Card-Adapter-PC/331385983543?epid=562090926&hash=item4d2824d237:g:nF0AAOSwIBBUaunP
Case Used:
ebay.com/itm/Aluminum-DIY-Project-Box-Enclosure-Case-PCB-Amplifier-Electronic-130-95-55mm/142615126986?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
If you like this content, make sure you hit the subscribe button, and the notification bell, so you will see my future videos. Uploads will go up on Monday and Fridays at 14:00 eastern time, and a live-stream will be held Sunday evenings.
Follow me on Twitter:
twitter.com/HamModern
Follow my Instagram:
instagram.com/modernham
Make sure to check out my blog, and shop over at:
themodernham.com .
⚡ Join the ModernHams Discord: ⚡
discord.gg/EbP9dTMrTU
