Uploaded May 2019 | Updated November 2026, 4 days ago
This is part 3 of building the apprehension engine (nightmare machine). The horror musical instrument created by Mark Korven and created by guitar maker Tony Duggan-Smith.
We will build the sides and use wooden dowels to strengthen the frame. (part 4 we will finish off the sides and get ready to frame).
This instrument makes some great Dark Ambient sounds.
All measurements are in Metric but you can also follow along in Imperial measurements.
Parts List for this tutorial:
PVA wood glue
Hand saw (or wood cutting instrument)
Square (or a right angle device)
Pencil
40 grit sandpaper
Rule or tape measure
Wooden dowel 5mm thick (no thicker then 1cm)
Credit: Check out the documentary 'Sounds of the Nightmare Machine' by Great Big Story: https://www.youtube.com/watch?v=1lTYP...
FOLLOW ME:
Instagram: instagram.com/freudenbergfilms
Twitter: twitter.com/Film_Masters
Facebook: facebook.com/FilmMastersPage
Website: freudenbergfilms.com
#apprehensionengine #horrormusic #moviescore
This is part 3 of building the apprehension engine (nightmare machine). The horror musical instrument created by Mark Korven and created by guitar maker Tony Duggan-Smith.
We will build the sides and use wooden dowels to strengthen the frame. (part 4 we will finish off the sides and get ready to frame).
This instrument makes some great Dark Ambient sounds.
All measurements are in Metric but you can also follow along in Imperial measurements.
Parts List for this tutorial:
PVA wood glue
Hand saw (or wood cutting instrument)
Square (or a right angle device)
Pencil
40 grit sandpaper
Rule or tape measure
Wooden dowel 5mm thick (no thicker then 1cm)
Credit: Check out the documentary 'Sounds of the Nightmare Machine' by Great Big Story: https://www.youtube.com/watch?v=1lTYP...
FOLLOW ME:
Instagram: instagram.com/freudenbergfilms
Twitter: twitter.com/Film_Masters
Facebook: facebook.com/FilmMastersPage
Website: freudenbergfilms.com
#apprehensionengine #horrormusic #moviescore










