Uploaded December 2025 | Updated September 2026, 2 weeks ago
I'll show you how to make a spider web farm in a terraria.
To do this, we first need to find a place where there will be the most Spider Nests.
Once we've chosen a place, we clear it, but you mustn't destroy the Spider Wall.
This is because the spider web will spawn on them.
Once you've cleared the necessary area, we need to build a box.
Also, inside, we need to build stone walls at a distance of 4 blocks from each other.
Then run wires and actuators to them so that we can turn them on and off by pressing a lever.
At the bottom of the box, we place a conveyor so that the cobwebs collect in one place.
We also need to leave some space to put a water pump.
Make sure to combine stone blocks of one color and water-holding blocks of another, and connect the water pump with a separate wire.
We also place a liquid sensor that reacts to water near the inlet pump and outlet pump.
Now all we need to do is first press the lever that turns off the stone.
Then press the lever that removes the blocks that hold the water.
And after about a second, turn the blocks that hold the water back on.
Now we see how the water drains down and removes all the cobwebs that have appeared during this time.
After all the cobwebs have been collected and the water has disappeared, we can turn the stone blocks back on.
All you have to do is wait until new cobwebs appear and press the levers again.
That's all.
Thank you for watching. Goodbye.
I'll show you how to make a spider web farm in a terraria.
To do this, we first need to find a place where there will be the most Spider Nests.
Once we've chosen a place, we clear it, but you mustn't destroy the Spider Wall.
This is because the spider web will spawn on them.
Once you've cleared the necessary area, we need to build a box.
Also, inside, we need to build stone walls at a distance of 4 blocks from each other.
Then run wires and actuators to them so that we can turn them on and off by pressing a lever.
At the bottom of the box, we place a conveyor so that the cobwebs collect in one place.
We also need to leave some space to put a water pump.
Make sure to combine stone blocks of one color and water-holding blocks of another, and connect the water pump with a separate wire.
We also place a liquid sensor that reacts to water near the inlet pump and outlet pump.
Now all we need to do is first press the lever that turns off the stone.
Then press the lever that removes the blocks that hold the water.
And after about a second, turn the blocks that hold the water back on.
Now we see how the water drains down and removes all the cobwebs that have appeared during this time.
After all the cobwebs have been collected and the water has disappeared, we can turn the stone blocks back on.
All you have to do is wait until new cobwebs appear and press the levers again.
That's all.
Thank you for watching. Goodbye.
